CRU WiebeTech UltraDock UDv5.5 Краткое руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Диагностическое оборудование CRU WiebeTech UltraDock UDv5.5. CRU WiebeTech UltraDock UDv5.5 4 страницы.
Печатать страницу
3 HPA/DCO HANDLING
The UltraDock UDv5.5 will check to see if any HPA's (host protected areas) or DCO's (device con-
figuration overlays) are present on startup. If an HPA or DCO is detected, the UltraDock UDv5.5
will indicate that one has been found and ask what you want to do with it. Use the Up and Down
buttons to scroll through the options, shown below, and then press Enter to select an option.
DCO FOUND
Keep
DCO – Keeps the DCO
Remove
DCO – Removes the DCO, exposing
any hidden data within that area
4 CRU CONFIGURATOR
CRU Configurator for both Mac and Windows provides extended configuration options for many
CRU products, including the WiebeTech UltraDock. It displays information about the UltraDock
UDv5.5 and any attached drive. It can also monitor the UltraDock UDv5.5 in the background and
sends an email or text message if a problem is detected.
Download it here:
www.cru-inc.com/support/software-downloads/configurator-software-download/
Setup Instructions
Connect the UltraDock UDv5.5 to your computer via the provided USB micro-B cable and then
open the Configurator application. Finally, open the Configurator application.
5 LED BEHAVIOR
LED
COLOR
Power Out
Power In
Error
Drive Access
HPA/DCO
STATE
Green
Solid
Green
Solid
Red
Solid
Blinking
Amber
Solid
Green
Solid
CRU WiebeTech UltraDock UDv5.5 Quick Start Guide
Keep
HPA – Keeps the HPA
Remove HPA
the HPA
Remove HPA
the HPA
The UltraDock UDv5.5 is powered on and outputting power.
The UltraDock UDv5.5 is connected to power.
There is a problem with the UltraDock UDv5.5. Please contact
Technical Support.
Data is currently being accessed from the attached drive.
Your computer host does not support drive activity polling.
A host protected area (HPA) or device configuration overlay (DCO)
has been detected on the attached drive.
HPA FOUND
Temp – Temporarily removes
Perm – Permanently removes
DESCRIPTION
3