Cruiser Consoles BUSHMAN 15L ROADIE fridge Base console Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Cruiser Consoles BUSHMAN 15L ROADIE fridge Base console. Cruiser Consoles BUSHMAN 15L ROADIE fridge Base console 6 страниц. Landcruiser console specialists
Печатать страницу
70 Series Landcruiser Console Specialists
11. SEAT REINSTALL
The 4 holes in each seat rail will need slotting into an oval
shape. About 6 mm for each hole is enough to allow for the
extra room needed for the fridge to fit between the seats.
This can be done with a good round file or a die grinder.
Remember to file the seat rail holes towards the centre of
the vehicle to allow the seats to move out. We also
recommend spraying silicon spray on the sides of the fridge
to help the seats slide back and forth.
Not required for SINGLE CABS side curtain airbag
DPF
12. GEARSTICK FITTING
Find the slotted hole under the vinyl with your thumb and
then poke a screwdriver through the centre of it.
13. GEARSTICK FITTING
The factory bolt can then be replaced into the side of the
console. Before tightening, pull the gear stick surround
console back towards the centre console to close any gap
between the fridge and the surround.
Page 5