ARIETE 5577/6 Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Железо ARIETE 5577/6. ARIETE 5577/6 8 страниц.

(L button) and set the thermostat knob (E) to the desired temperature without pressing the steam buttons (H) or (G). The

indicator light (D) of the iron will turn on and turn off when the iron has reached the temperature.

sTeAm IronIng

Set the ironing temperature by turning the adjustment knob (E) past the symbol (

iron to turn off. The iron is now ready for use. Before applying a jet of steam to the article to be ironed, release two or three

good jets of steam towards the floor to stabilise the steam flow. When you press the steam button (H) from 3 to 5 seconds,

a heavy steam jet is dispensed. The steam jet stops when the button is released. If the steam supply button (H) is operated

continuously for more than 30 seconds, drops of water may come from the steam holes in the plate of the iron. It is recom-

mended that the button (H) is used for shorter periods.

continuous steam

Set the ironing temperature by turning the adjustment knob (E) past the symbol (

iron to turn off. When the temperature is reached, press the steam button (G) Fig. 11. The cursor (F) will lock the button,

making the jet of steam exit continuously and steadily. To unlock the button (G) and stop the continuous jet, press the cursor

(F) forward (Fig. 12).

verTIcAl IronIng

You can use the jet of continuous steam for ironing hanging fabrics. This special ironing procedure serves to remove

creases from curtains, fabrics, etc... Set the ironing temperature by turning the adjustment knob (E) past the symbol (

Put the curtain or fabric in the position you want to iron it vertically and press the steam button.

Warning!

Do not iron fabrics held by other people.

suggesTIons

First check whether the fabric has a label containing ironing instructions and compare the symbol with the instructions which

follow. If there is no label with instructions, but you know the type of material, follow the instructions below.

Note that the table refers to fabrics not treated with sizing agents or similar products; if they have been, you can also iron

at a lower temperature.

When you change the temperature by turning the thermostat knob (E), the indicator light (D) will light on and remain lit until

the iron has reached the new temperature.

Divide the articles to be ironed according to the types of material: wool with wool, cotton with cotton, etc...

Because the iron heats up much more quickly than it cools down, it is advisable to start with those fabrics which require

lower temperatures and move on to those which require progressively higher temperatures. If the material is made up of

more than one type of fibre, always set the temperature to the fibre which requires less heat. For example, if the material

is made up of 70% synthetics and 30% cotton, set the temperature control to position (•) (see table) without steam, that is,

the temperature for synthetic fabrics.

Label Ironing

Kind of fabric

instructions

Synthetic fabrics:

Acetate

Acrylic

Viscose

Poliammide (Nylon)

Viscose (rayon)

Silk

Wool

Cotton

Linen

The mark on the label means do not iron

If you do not know the composition of the article to be ironed, choose a part of the article which will not be seen. Do a test

ironing on this part to establish the appropriate temperature (always start with a relatively low temperature and work up until

the ideal temperature is reached). Pure (100%) wool articles can be ironed with the iron set to one of the steam positions.

Thermostat

•

••

•••

). Wait for the indicator lamp (D) of the

•••

). Wait for the indicator lamp (D) of the

•••