Dimplex SKG20 Инструкции по установке и эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Плита Dimplex SKG20. Dimplex SKG20 4 страницы. Stockbridge stove

Instructions for fitting Coal Option

Introduction

Your fire is provided with a coal effect option. To fit simply

follow the instructions given below.

Removal of Log Effect

Remove the

three

screws securing the log effect assembly.

Remove the fret and slide out the log effect assy ( see Fig. 6).

Fitting Coal Effect

Fit the coal effect (flat fuel bed) and fret in position and secure

with the

three

screws (see Fig. 7)

Place the coal lumps on the fuel bed. A plastic glove is

provided for handling the coal.

Note: The log effect should be stored away for possible

future use.

Lamp Replacement

Two lamps are located behind the back panel as indicated in

Fig 8.

To gain access to the lamps, the four screws which secure

the back panel, must be removed. Remove and slide out

panel as indicated on Fig. 9.

Fig. 6

Remove the defective lamp by unscrewing it as shown - see

Fig. 10. Replace with a 60W E14 SES Clear Candle lamp.

Take care not to over-tighten the lamp. Refit the back panel

and secure with the four screws.

Fig. 7

4 screws on

back panel

Fig. 8

Fig. 9

Fig. 10