Aeon Labs Aeotec Nano switch Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Переключатель Aeon Labs Aeotec Nano switch. Aeon Labs Aeotec Nano switch 9 страниц.

3. Install Nano Switch to the gang box.

a. Live/Hot wire connection: Connect the Live/Hot wire to the "L" terminal on the Nano Switch.

b. Neutral wire connection: Connect the Neutral wire to the "N" terminal on the Nano Switch.

c. Load wire connection: Connect the Load wire to the "OUT" on the Nano Switch.

d. External/manual Switch connection: Connect 2 18AWG wires to the "S1" and "S2" on the Nano Switch.

e. External/manual Switch connection: Connect 2 18AWG wires form the 2 terminals on the External/manual Switch to

the Live wire.

Note: This is the physical connection diagram for 120/230VAC power input.

4. Mounting the gang box.

1. Position all wires to provide room for the device. Place the Nano Switch inside the gang box towards the back of the

box.

2. Position the antenna towards the back of the box, away from all other wiring.

3. Reinstall the Nano Switch to the gang box.

4. Reinstall the cover onto the gang box.