Dimplex DXMBCF Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Вентилятор Dimplex DXMBCF. Dimplex DXMBCF 8 страниц.

How to assemble the base

Carefully remove the split base and the tower fan from its

packaging.

Pass the power cord between the centre of the two halves split base

and fit the two halves' together by lining the overlap bosses on the

bottom (with cable exit) with their sockets on the other half dropping

into place and pressing together.

Bring the assembled base up to the bottom of the tower and line up

the small pillar on the top of the raised centre of the base with the

matching hole in the base socket location of the tower fan, pull the

cable through fully so it doesn't interfere with them fitting together.

Take the 4 large screws provided and pass them through the holes in

the circular bosses (located around the central hub on the underside of

the base) into the bottom of the tower, screw fix them firmly in place.

Carefully fit the cable through the slot to the back side of the hub and

then through the guide location channel at the outside of the circular

base to exit level with the base through the channel at the back. The

Mont Blanc Cooling fan is now ready to stand and operate.

Fig. 1

THIS IS NOT A FAULT

If the fan speed varies randomly including stopping and starting automatically you

have selected either NATURAL

or NIGHTIME

Variable Blower Mode which

simulate different breezy conditions. To de-select this mode you must press the

button to change back to constant blowing mode, please refer to section 'd'

following on how to change modes. To run in constant speed mode only use the

button to select the speed you require, please refer to section 'b' following.