Dimplex RLG20BR Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для каминов Dimplex RLG20BR. Dimplex RLG20BR 18 страниц. 20 electric log set
Также для Dimplex RLG20BR: Руководство по эксплуатации (15 страниц)
Печатать страницу
Operation
RLG20
Manual Control
The manual controls for the Revillusion are located on the
right-front leg of the log grate.
Power
Press to turn the flame effect on and activate the
previous heat setting (Off, Low, or High). Press again
to put the unit in standby mode.
Heat
• Heat On
Press to set the heat to Low (indicated by 1 short
beep). Press again to set the heat to High (indicated
by 2 short beeps).
• Heat Off
Press to turn heat Off (indicated by 1 long beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off. The
log LEDs remain On when the heater is ON and the
flame effect is Off.
360
Light
o
Press multiple times to change the LEDs on the
sides and back of the unit from white flickering to
white solid to Off. (This feature is active only when
the flame effect is On.)
Brightness
Press multiple times to toggle the log set LEDs
through its four brightness settings.
Remote Control
The fireplace is supplied with a multi-function remote con-
trol.
The remote control has a range of approximately 30 ft (9
m). To operate correctly, the remote control must be pointed
toward the front of the unit.
Power
Press to activate the current standby state (On/Off).
• Standby State On
Press to turn everything Off. Press again to active the
previous flame effect state.
• Standby State Off
Press to activate the previous flame effect state.
- If the flame effect was On, the previous heat setting
will be activated (High, Low, or Off).
- If the flame effect was Off, the previous heat setting
will be activated (High or Low).
Press again to turn everything Off.
Flame
Press to light the back log, grate log, and ember mat
(optional), and start the flame effect.
Heat
• Heat On
Press to set the heat to Low (indicated by 1 short
beep). Press again to set the heat to High (indicated
by 2 short beeps).
• Heat Off
Press to turn heat Off (indicated by 1 long beep).
!
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off. The log
LEDs remain On when the heater is ON and the flame
effect is Off.
360
Light
o
Press multiple times to change the LEDs on the
sides and back of the unit from white flickering to
white solid to Off. (This feature is active only when
the flame effect is On.)
Brightness
Press multiple times to toggle the log set LEDs
3