Pioneer DEH-P6200 Руководство по установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильный приемник Pioneer DEH-P6200. Pioneer DEH-P6200 8 страниц. Pioneer deh-p6200: install guide
Печатать страницу
Connecting the Units
7 When not connecting a rear speaker lead to a Subwoofer
Front output
IP-BUS input (Blue)
Rear output
Antenna jack
This Product
Multi-CD player
IP-BUS cable
(sold separately)
Subwoofer output
or Non Fading output
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
Yellow/black
(max. 300 mA 12 V DC).
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
See the section "DFS Alarm
Installation".
Brown
White/yellow
Yellow
Fuse holder
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when using a
different amp (sold separately).
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
System remote control
+
+
Front speaker
Front speaker
≠
≠
White
Gray
+
+
Front speaker
Front speaker
≠
≠
White/black
Gray/black
Left
Right
Green
Violet
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
+
+
Rear speaker
Rear speaker
≠
≠
+
+
Subwoofer
Subwoofer
≠
≠
7 When using a Subwoofer without using a different amp (sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Antenna jack
Multi-CD player
IP-BUS cable
(sold separately)
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
See the section "DFS Alarm
Installation".
Brown
White/yellow
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Fig. 2
Front output
IP-BUS input (Blue)
Rear output
This Product
Subwoofer output
Blue/white
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Left
+
Front speaker
≠
Fuse holder
<ENGLISH>
Right
White
Gray
+
Front speaker
≠
White/black
Gray/black
Green
Violet
+
Subwoofer
≠
Green/black
Violet/black
Do not connect anything to these speaker leads.
Note:
Change the Initial Setting of this product.
(Refer to the Operation Manual.)
Fig. 3