Pioneer MVH-G210BT Руководство пользователя - Страница 17
Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильный приемник Pioneer MVH-G210BT. Pioneer MVH-G210BT 24 страницы. Rds av receiver
Печатать страницу
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
Pioneer MNR.book Page 17 Wednesday, July 18, 2018 3:59 PM
Menu Item
Description
Touch
or
[Fader/Balance]
[Front] and [Rear] to [0] when using a dual speaker system.
Touch
or
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
Adjust the volume level of each source to prevent radical
[Source Level Adjuster]
[-4] to [+4]
changes in volume when switching between sources other
than FM.
Touch
or
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
Select enable or disable subwoofer output from this
[Subwoofer]
[On] [Off]
product.
Adjust the speaker output level of the listening position.
[Speaker Level]
[Front Left] [Front Right]
1
Touch
[Rear Left] [Rear Right]
select the output speaker.
[Subwoofer] [Listening
2
Touch
Position]
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Preout].
Select the subwoofer phase and LPF cut-off frequency
[Subwoofer Settings]
(page 17).
Select a listening position that you want to make as the
[Listening Position]
[Off] [Front Left] [Front
center of sound effects.
Right] [Front] [All]
Adjust the bass boost level.
[BASS Boost]
[0] to [+6]
to adjust the front/rear speaker balance. Set
to adjust the left/right speaker balance.
to adjust the source volume after
or
to select the listening position then
or
to adjust the selected speaker output
Menu Item
Description
Compensates for deficiencies in the low-frequency and
[Loudness]
[Off] [Low] [Mid] [High]
high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function. (MVH-G210BT)
Adjusting the LPF cutoff frequency value
You can adjust the LPF cutoff frequency value for subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press
.
2
Touch
then
.
3
Touch [Subwoofer Settings].
4
Touch
or
to set the cutoff position.
The following items can also be set.
Switches the subwoofer phase between normal and reverse position.
Switches the LPF setting to [On] or [Off].
LPF
Video settings
The menu items vary according to the source.
[Time Per Photo Slide]
Menu Item
Description
Select the interval of image file slideshows on this product.
[Time Per Photo Slide]
[5sec] [10sec] [15sec]
[Manual]
19_XL_EU_QRI3073(A5_Horizontal)
17
En
MVH-G210BT/MVH-G110