Pioneer SUPER TUNER III D FH-P8000BT Руководство по установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильный приемник Pioneer SUPER TUNER III D FH-P8000BT. Pioneer SUPER TUNER III D FH-P8000BT 7 страниц. Pioneer cd receiver installation manual
Также для Pioneer SUPER TUNER III D FH-P8000BT: Краткое руководство по эксплуатации (2 страниц), Брошюра (9 страниц)
Печатать страницу
Connecting the unit
English
When not connecting a rear speaker lead to a subwoofer
Microphone input
This product
Front output
Rear output
Subwoofer output
14 cm (5-1/2 in.)
AUX jack (3.5 ø)
Antenna jack
Wired remote input
Hard-wired remote control adaptor
Fuse (10 A)
IP-BUS input (Blue)
can be connected (sold separately).
Multi-CD player
(sold separately)
IP-BUS cable
USB cable
Connect to separately sold
USB device.
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
1.5 m (4 ft. 11 in.)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
With a 2 speaker system, do not
Black (chassis ground)
connect anything to the speaker leads
Connect to a clean, paint-free metal location.
that are not connected to speakers.
White
Gray
Front speaker
White/black
Gray/black
Left
Green
Violet
Rear speaker
Green/black
Violet/black
Connecting the unit
Microphone
4 m (13 ft. 1n.)
Use a stereo mini
To rear output
plug cable to connect
Connect with RCA cables
with auxiliary device.
(sold separately)
To front output
To subwoofer
output
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.
Subwoofer
Front speaker
Front speaker
Right
Rear speaker
Rear speaker
English
Connecting the unit
When using a subwoofer without using the optional amplifier
Front output
Rear output
Subwoofer output
Power amp
(sold separately)
Antenna jack
Power amp
(sold separately)
IP-BUS input (Blue)
Power amp
(sold separately)
Multi-CD player
(sold separately)
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Subwoofer
Black (chassis ground)
Connect to a clean, paint-free metal location.
Front speaker
Note:
Rear speaker
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
English
Connecting the unit
Microphone
Microphone input
This product
4 m (13 ft. 1n.)
14 cm (5-1/2 in.)
AUX jack (3.5 ø)
Use a stereo mini
plug cable to connect
with auxiliary device.
Wired remote input
Fuse (10 A)
Hard-wired remote control adaptor can
be connected (sold separately).
IP-BUS cable
1.5 m (4 ft. 11 in.)
USB cable
Connect to separately sold USB device.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Front speaker
Left
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Not used.
English
White
Gray
Front speaker
White/black
Gray/black
Right
Green
Violet
Subwoofer (4 Ω)
Green/black
Violet/black
Green
Violet
Subwoofer
(4 Ω) × 2
Green/black
Violet/black