Pioneer Super Tuner IIID DEH-3250UB Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильный приемник Pioneer Super Tuner IIID DEH-3250UB. Pioneer Super Tuner IIID DEH-3250UB 24 страницы. Cd receiver/radio cd/cd player

Печатать страницу

Section

Operating this unit

The FM tuning step employed by seek tuning can be

switched between 100 kHz, the preset step, and 50

kHz.

If seek tuning is performed in 50 kHz steps, sta-

tions may be tuned in imprecisely. Tune in the sta-

tions with manual tuning or use seek tuning

again.

The tuning step remains at 50 kHz during manual

tuning.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the FM tuning step.

50KHZ (50 kHz) 100KHZ (100 kHz)

3 Press M.C. to confirm the selection.

AM STEP (AM tuning step)

The AM tuning step can be switched between 9 kHz,

the preset step, and 10 kHz. When using the tuner in

North, Central or South America, reset the tuning

step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10

kHz (530 kHz to 1 640 kHz allowable).

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the AM tuning step.

10KHZ (10 kHz) 9KHZ (9 kHz)

3 Press M.C. to confirm the selection.

AUX (auxiliary input)

Activate this setting when using auxiliary device con-

nected to this unit.

1 Press M.C. to turn AUX on or off.

USB (plug and play)

This setting allows you to switch your source to USB/

IPOD automatically.

1 Press M.C. to turn the plug and play on or off.

ON When USB storage device/iPod is con-

nected, the source is automatically switched to

USB/IPOD. If you disconnect your USB storage

device/iPod, this unit s source is turned off.

OFF When USB storage device/iPod is con-

nected, the source is not switched to USB/IPOD

automatically. Please change the source to USB/

IPOD manually.

Note

Operation is complete even if the menu is can-

celled before being confirmed.

Using the AUX source

Insert the stereo mini plug into the

AUX input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on this page.

Turning the clock display

on or off

Press

to turn the clock display on or

off.

Note

The clock display disappears temporarily when

you perform other operations, but the clock dis-

play appears again after 25 seconds.