Pioneer X-CM56 Руководство по эксплуатации - Страница 25

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Автомобильный приемник Pioneer X-CM56. Pioneer X-CM56 38 страниц. Cd receiver system
Также для Pioneer X-CM56: Руководство по эксплуатации (40 страниц)

Pioneer X-CM56 Руководство по эксплуатации
Using the tuner

Listening to the DAB+ (X-CM56D only)

About DAB+ (Digital Audio Broadcasting)

Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more
stations (services). Each station contains a primary service
and there may be one or more secondary services. This
allows several programmes or services to be transmitted on
a single frequency.
DAB + SIGNAL
MULTIPLEX
(ENSEMBLE)

Tuning

1
Press the TUNER until "DAB" appears on
the display.
When turned on for the first time, the unit scans radio
stations automatically to create a station list.
The stations will be stored in alphanumeric order and the first
station on the list will be selected and you will hear it through
the speakers.
2
Press the TUNE +/– to select the desired
station.
3
Within 10 seconds, press the ENTER on
the remote control to tune into the desired
station.
• If no station is found, "NO SIGNAL" appears.
• Up to 100 appears for total received stations.
Auto Scan
You can make the auto scan again when you move the unit
to other areas or add multiplex channels to the station list.
1
2
appears on the display.
3
appears on the display.
4
Auto Scan scanning begins.
After the scanning process is complete, the first station that
was detected is selected.
Manual tune
You can manually store stations which Auto Scan cannot
find. If reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto
Scan first.
1
2
appears on the display.
3
SERVICES
appears on the display.
4
5
SERVICES
DAB+ frequency.
COMPONENTS
6
(STATIONS)
Press the TUNER until "DAB" appears on the display.
Press MENU and then press
Press ENTER and then press
Press ENTER.
Press the TUNER until "DAB" appears on the display.
Press MENU and then press
Press ENTER and then press
Press ENTER.
Within 10 seconds, press the TUNE +/– to select the
Within 10 seconds, press the ENTER.
• If the level is too low, move the aerial or unit to improve
reception.
07
/
until "DAB SCAN"
/
until "AUTO"
/
until "DAB SCAN"
/
until "MANUAL"
25
En