Pioneer XDV-P6 - DVD Changer - in-dash Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильный приемник Pioneer XDV-P6 - DVD Changer - in-dash. Pioneer XDV-P6 - DVD Changer - in-dash 9 страниц. Other manual
Также для Pioneer XDV-P6 - DVD Changer - in-dash: Руководство по установке (5 страниц)
Печатать страницу
Connecting the Units
When Using a Display Connected Rear Video Output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or
Video CD while Driving.
• NEVER connect audio output (AUDIO OUT) to sold separately power amp.
Yellow (rear video output)
Hide-away unit
White (audio output (Left))
Red (audio output (Right))
IP BUS
STAND ALONE
This product
Black
9 cm (3-1/2 in.)
Not used.
20 cm (7-7/8 in.)
RCA cable (supplied)
Black
2.7 m (8 ft. 10 in.)
6 m (19 ft. 8 in.)
25 pin cable (supplied)
Depending on where you install,
this cable is not used.
To video input
To audio inputs
Display with RCA
input jacks
<ENGLISH>
Connecting the Power Cord
Hide-away unit
Red
When using this product in STAND ALONE
Fuse resistor
mode, connect this cord to electric terminal
controlled by ignition switch (12 V DC) ON/OFF.
When using this product in IP BUS mode,
do not connect this cord.
Orange/white
To lighting switch terminal.
Fuse resistor
Y Y
Yello
w
To terminal always supplied with power
Fuse holder
regardless of ignition switch position.
(4 A)
Black (ground)
To vehicle (metal) body.