Pioneer DEH-S5120BT Инструкции по обновлению прошивки - Страница 5

Просмотреть онлайн или скачать pdf Инструкции по обновлению прошивки для Приемник Pioneer DEH-S5120BT. Pioneer DEH-S5120BT 6 страниц. Audio receivers
Также для Pioneer DEH-S5120BT: Инструкции по обновлению прошивки системы (7 страниц), Инструкции по обновлению прошивки (6 страниц)

9. After starting, there will be a progress bar while updating.

-> If it shows "ERROR" on the display, try the following:

"ERR->RETRY" Disconnect, then reconnect the USB storage device and press the M.C. dial

update.

10. Wait until the update is complete, which will take about 5 minutes.

-> You will see the following screen if the update has completed successfully.

11. The product will reboot after the update is finished. Do not touch anything even when the screen is

blacked out. After it has finished rebooting, the screen will return to the menu screen.

12. The firmware update is now complete. Your Pioneer Audio Receiver is now ready for use.

Verify that the firmware has been updated

Perform the same procedure for "Displaying the firmware version" to check that the firmware has been

updated.

Procedure:

Start the vehicle engine (in an open, well-ventilated area).

If AV Source is on, press and hold SRC/OFF.

Press M.C. (multi-control) dial to display the "Initial" menu. then press to confirm.

to retry the