Pioneer VSX-C402 Инструкции по эксплуатации - Страница 30

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации для Приемник Pioneer VSX-C402. Pioneer VSX-C402 46 страниц. Audio/video multi-channel receiver

Using other functions

08
Chapter 8
Using other functions

Selecting the input signal type

The DVD, STB, DVR/TV and FRONT inputs all have both
analog and digital jacks. You can select the type of signal
to be used in each case. The input signal type for the
current input is indicated in the display: ANA (analog),
DIG (digital).
The default AUTO setting is usually sufficient, letting the
receiver decide the most suitable signal type. However, if
you want to record from the VIDEO IN/OUT AV
connector or the DVR/TV IN/OUT AV connector, then
you should set the input signal type to analog.
1
Press RECEIVER.
2
Press SIGNAL SELECT to change the input signal
type.
• SEL. AUTO – (default setting) Uses digital if available,
otherwise analog
• SEL. ANA – Uses the analog signal
• SEL. DIG – Uses the digital signal
• When the VIDEO or FM/AM inputs are used, the
display always shows ANA (analog).
30
En
RECEIVER
SIGNAL SEL
BAND

Using the sleep timer

The sleep timer automatically puts the receiver into
standby after the specified period of time.
RECEIVER
1
Press RECEIVER.
2
Press SLEEP to set the sleep timer.
Press repeatedly to select between:
• 90 MIN. – Switches to standby after 90 minutes
• 60 MIN. – Switches to standby after one hour
• 30 MIN. – Switches to standby after 30 minutes
The sleep timer indicator (
has been set.
• The sleep timer is cancelled if you switch on the AV
Direct function. See also The AV Direct mode on
page 9 and AV Direct setting on page 34.
• Press the SLEEP button once to view how much time
is left on the timer before shutdown. Each press after
that will cycle through the possible sleep time
lengths.
SLEEP
) lights when the sleep timer