Pioneer VSX-C502-S Инструкция по эксплуатации - Страница 37

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Приемник Pioneer VSX-C502-S. Pioneer VSX-C502-S 49 страниц. Audio/video multi-channel receiver

Печатать страницу

The System Setup menu

Using the SR+ mode with a Pioneer plasma

display

When connected using the supplied SR+ cable, a

number of features become available to make using this

receiver with your Pioneer plasma display even easier.

These features include:

• On-screen displays when making receiver settings,

such as speaker setup, MCACC setup, and so on.

• On-screen volume display.

• On-screen display of listening mode.

• Automatic video input switching on the plasma

display.

• Automatic volume muting on the plasma display.

(When VOL C ON is selected.)

See also Using this receiver with a Pioneer plasma display

on page 18 for connecting up, and SR+ control for Pioneer

plasma displays on page 36 for setting up the receiver.

Make sure that the plasma display and this

receiver are switched on and that they are

connected with the SR+ cable.

See Using this receiver with a Pioneer plasma display on

page 18 for more on connecting these components.

To switch SR+ mode on/off, press SR+ button on

the remote control.

Caution

• The SR+ setting remains in effect even if the power is

switched off.

• The automatic volume muting feature is enabled

separately; see SR+ control for Pioneer plasma

displays on page 36.

Setting individual channel levels

Use to set the relative volume of each channel as you find

necessary for balanced surround sound.

RECEIVER

CH SELECT

MASTER

VOLUME

TUNE

TEST TONE

Use MASTER VOLUME to adjust the volume to an

appropriate level.

Press RECEIVER then TEST TONE to output the

test tone.

The test tone is output in the following order (from

speakers that are switched on and are appropriate for the

current listening mode):

• L – Front left

• C – Center

• R – Front right

• RS – Right surround

• SB – Surround back

• LS – Left surround

• SW – Subwoofer

Use the

(cursor up/down) buttons to adjust

speaker levels so that you hear the test tone at the

same volume from each speaker when seated in

your main listening position.

• The channel level range is ± 10 dB.

Press RECEIVER then TEST TONE to turn off the

test tone.

Note

• Since the subwoofer transmits an ultra-low

frequency its sound may seem quieter than it actually

is. Be careful not to turn up your subwoofer too much

and check the volume with an actual source.

• The subwoofer volume is best controlled with the

volume control on the subwoofer unit itself.

• The speaker volume can be adjusted without

outputting the test tone by pressing CH SELECT then

using the

(cursor up/down) buttons. This level

setting mode is automatically exited after 5 seconds

of inactivity.

• The default setting is 0 dB for all channels.

• You cannot use the test tone when the multichannel

analog inputs (DVD 5.1ch) are selected, or when

playing 88.2/96 kHz PCM or 96/24 DTS sources.