Pioneer VSX-523-K Руководство по эксплуатации - Страница 19
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереоприемник Pioneer VSX-523-K. Pioneer VSX-523-K 38 страниц. Av receiver
Также для Pioneer VSX-523-K: Технические характеристики (2 страниц), Краткое руководство по эксплуатации (21 страниц), Краткое руководство по эксплуатации (7 страниц), Руководство по эксплуатации (6 страниц), Руководство по эксплуатации (6 страниц)
![Pioneer VSX-523-K Руководство по эксплуатации](/uploads/products/server2/6622576/6622576.jpg)
Chapter
3
3
Basic Setup
Automatically setting up for surround sound
(MCACC)
The Auto Multi-Channel ACoustic Calibration (MCACC) setup
measures the acoustic characteristics of your listening area,
taking into account ambient noise, speaker size and distance,
and tests for both channel delay, channel level and X.Over.
After you have set up the microphone provided with your
system, the receiver uses the information from a series of test
tones to optimize the speaker settings and equalization for
your particular room.
CAUTION
•
The test tones used in the Auto MCACC setup are output at
high volume.
Important
•
The OSD will not appear if you have connected using the
HDMI output to your TV. Use composite connections for
Auto MCACC setup.
•
The Auto MCACC setup will overwrite any existing speaker
settings you've made.
•
Before using the Auto MCACC setup, the iPod/USB input
should not be selected as an input source.
1
Switch on the receiver and your TV.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding
composite cable.
3
Connect the microphone to the MCACC SETUP MIC jack
on the front panel.
Make sure there are no obstacles between the speakers
and the microphone.
Microphone
Tripod
If you have a tripod, use it to place the microphone so that
it's about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a
table or a chair.
19
4
Press
RECEIVER
on the remote control, then press the
HOME MENU
button.
The Home Menu appears on your TV. Use
on the remote control to navigate through the
ENTER
screens and select menu items. Press
the current menu.
•
Press
at any time to exit the Home
HOME MENU
Menu. If you cancel the Auto MCACC setup at any
time, the receiver automatically exits and no settings
will be made.
•
The screensaver automatically starts after three
minutes of inactivity.
5
Select 'Auto MCACC' from the Home Menu, then press
ENTER.
Ho me Me nu
1 .Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
R et u r n
•
Mic In! blinks when the microphone is not connected
to MCACC SETUP MIC jack.
Try to be as quiet as possible after pressing ENTER. The
system outputs a series of test tones to establish the
ambient noise level.
6
Follow the instructions on-screen.
•
Make sure the microphone is connected.
•
Make sure the subwoofer is on and the volume is
turned up.
•
See below for notes regarding background noise and
other possible interference.
4
///
and
6
to exit
RETURN
34