Pioneer VSX-532 Руководство по эксплуатации - Страница 30
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереоприемник Pioneer VSX-532. Pioneer VSX-532 39 страниц.
Печатать страницу
6
6
•
Surr – Select LARGE if your surround speakers
reproduce bass frequencies effectively. Select SMALL to
send bass frequencies to the other speakers or
subwoofer. If you didn't connect surround speakers
choose NO (the sound of the surround channels is sent to
the other speakers).
•
Subwoofer – LFE signals and bass frequencies of
channels set to SMALL are output from the subwoofer
when YES is selected (see notes below). Choose the
PLUS setting if you want the subwoofer to output bass
sound continuously or you want deeper bass (the bass
frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you
did not connect a subwoofer choose NO (the bass
frequencies are output from other speakers).
4
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
Note
•
If you select SMALL for the front speakers, the subwoofer
will automatically be fixed to YES. Also, the center,
surround can't be set to LARGE if the front speakers are
set to SMALL. In this case, all bass frequencies are sent
to the subwoofer.
•
If you have a subwoofer and like lots of bass, it may seem
logical to select LARGE for your front speakers and PLUS
for the subwoofer. This may not, however, yield the best
bass results. Depending on the speaker placement of your
room you may actually experience a decrease in the
amount of bass due to low frequency cancellations. In this
case, try changing the position or direction of speakers. If
you can't get good results, listen to the bass response with
it set to PLUS and YES or the front speakers set to
LARGE and SMALL alternatively and let your ears judge
which sounds best. If you're having problems, the easiest
option is to route all the bass sounds to the subwoofer by
selecting SMALL for the front speakers.
X.Over
•
Default setting: 100Hz
This setting decides the cutoff between bass sounds playing
back from the speakers selected as LARGE, or the
subwoofer, and bass sounds playing back from those
selected as SMALL. It also decides where the cutoff will be
for bass sounds in the LFE channel.
•
For more on selecting the speaker sizes, see
Setting on page
29.
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'X.Over' from the Manual SP Setup menu.
2.Manual SP Setup
2b.X.Over
a.Speaker Setting
Frequency
b.X.Over
c.Channel Level
d.Speaker Distance
Return
3
Choose the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
CAUTION
•
The test tones used in the Channel Level settings are
output at high volume.
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'Channel Level' from the Manual SP Setup
menu.
2c.Channel Level
2.Manual SP Setup
a.Speaker Setting
Test Tone
b.X.Over
c.Channel Level
d.Speaker Distance
Enter:Next
Return
30
Speaker
3
Select a setup option.
•
Manual – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
•
Auto – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4
Confirm your selected setup option.
The test tones will start after you press ENTER. After
100Hz
the volume increases to the reference level, test tones
will be output.
2c.Channel Level
Return
5
Adjust the level of each channel using /.
If you selected Manual, use
The Auto setup will output test tones in the order shown
on-screen:
2c.Channel Level
Adjust the level of each speaker as the test tone is
emitted.
Note
•
If you are using a Sound Pressure Level (SPL) meter, take
Manual
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
•
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
Return
soundtrack.
6
When you're finished, press RETURN.
You return to the Channel Level menu.
Home Menu
Test Tone
[ Manual ]
Please Wait . . .20
Caution
Loud test tones
will be output.
Return
/
to switch speakers.
Front L
0dB
Center
[
0dB]
Front R
[
0dB]
Surround R
[
0dB]
Surround L
[
0dB]
Subwoofer
[
0dB]
Return
2
4
33