Pioneer VSX-D704S Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереоприемник Pioneer VSX-D704S. Pioneer VSX-D704S 40 страниц. Audio/video stereo receiver

Pioneer VSX-D704S Руководство по эксплуатации
BEFORE OPERATING, ADJUST THE POSITION OF THESE SWITCHES
TWO
VOLTAGE
SELECTOR
SWITCHES
(Not available on U.S. and Canadian models)
Only multi-voltage
models are provided
with these
switches,
U.S.
and
Canadian
models
are
not
provided
with
these
switches.
Mains
voltages
in
Saudi Arabia
are 127 V and 220 V only. Never
use
this model
with the 110 V setting
in Saudi Arabia.
The line voltage selector switches
are on the rear panel.
Before your model is shipped from the factory, these switches
are set to the power requirements
of the destination. Check
that they are set properly before plugging the power cord
into the household wall socket. If the voltage is not properly
set or if you move to an area where the voltage requirements
differ, adjust the selector switches as follows.
1.Use a medium-size screwdriver.
2.First, insert the screwdriver
in the groove of the voltage
selector at the right, and adjust so that the tip of the 9roove
points to the voltage value of your area.
3.Next, insert the screwdriver
in the groove of the voltage
selector at the left and adjust until the voltage is the same
as at the right.
TWO
VOLTAGE
SELECTOR
110V
_40
120-127V
CHANNEL STEP/FM DE-EMPHASIS SWITCH
(Not available on U.S. and Canadian models)
The unit has been factory preset to the channel allocation
and de-emphasis value for the area in which it is to be sold.
If these values are set incorrectly, the tuned in frequency
may be wrong,
or sound may be distorted,
resulting in an
inability to reproduce reception signals at their proper sound
quality. For this reason, be sure to confirm that the values
are set correctly before first using the unit.
(FM 100 kHz/75
ps, AM 10 kHz) position:
Set to this position for areas with an FM reception step of
100 kHz, de-emphasis 75ps and AM 10 kHz.
(FM 50 kHz/50
ps, AM 9 kHz) position:
Set to this position, for areas with an FM reception step of
50 kHz, de-emphasis 50 ps and AM 9 kHz.
NOTE:
When unsure about the channel allocation and de-emphasis values
for your area,consult your dealer for correct information.
FM _OkHz -4 F lOOkH,
i
/_°,"s/ //7_,,,s
[
/FM
DE-
EMPHASIS
Medium-size screwdriver
4
<ARB7035>