Pioneer PRS-D1000M Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Pioneer PRS-D1000M. Pioneer PRS-D1000M 50 страниц. Class d mono amplifier
Также для Pioneer PRS-D1000M: Руководство пользователя (9 страниц), Руководство пользователя (9 страниц), Руководство по эксплуатации (38 страниц)

Two Amplifier (Ex. Bridge)

2 Ω to 16 Ω

MODE SELECT switch

must be in SYNC INV

position.

• Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple

speakers with a bridge, check that the synthetic impedance is at least 2 Ω.

• The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER

MODE switch to the HI-CURRENT position if the impedance is from 2 Ω to less than 4 Ω, or slide it to the

NORMAL position if the impedance is from 4 Ω to 16 Ω. The same setting is used for both amplifiers.

• When switching to the SYNC INV mode, the seal over the MODE SELECT switch must be peeled off and

you can find SYNC INV switch. Peel off the seal after checking that connections are correct.

Two Amplifier

1 Ω to 8 Ω

• Use speakers having an impedance from 1 Ω to 8 Ω.

• The setting of the POWER MODE switch varies according to the speaker impedance. See the "Setting the

Unit" section for details. The same setting is used for both amplifiers.

MODE SELECT switch must

be in MASTER position.

MODE SELECT switch must

be in MASTER position.

MODE SELECT switch

must be in SYNC position.

SYNC OUTPUT

Connecting

speaker wire

(sold separately).

SYNC OUTPUT

Connect to a car stereo.

For details, see the

"Connection Diagram".

Connecting wire with RCA