Pioneer PRS-D420 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Pioneer PRS-D420. Pioneer PRS-D420 38 страниц.

1. SERVICE PRECAUTIONS

3 7 63 1515 0

1.1 SERVICE PRECAUTIONS

- Service Precaution

1. You should conform to the regulations governing the product (safety, radio and noise, and other

regulations), and should keep the safety during servicing by following the safety instructions described in

this manual.

2. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by

electrostatic induction.

3. The area where the temperature gets high as a completely assembled product is the heat sink. As a unit, on

the other hand, sub-heat sink and the periphery of the sub-heat sink are the areas where the temperature

gets high.

L 13942296513

For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.

Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs

accompanied by reworking of soldering.

Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C.

Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although

the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of

the soldering iron.

Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting

temperatures (hard to melt/easy to harden).

The following lead-free solders are available as service parts:

Parts numbers of lead-free solder:

GYP1006 1.0 in dia.

GYP1007 0.6 in dia.

GYP1008 0.3 in dia.

www

http://www.xiaoyu163.com

u163

http://www.xiaoyu163.com

2 9

Q Q

6 7

1 3

1 5

PRS-D4200F/XS/UC

9 4

2 8

0 5

2 9

9 4

2 8

9 9