Pioneer VSP-200 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Pioneer VSP-200. Pioneer VSP-200 15 страниц. Av surround processor/amplifier
Печатать страницу
DOLBY PRO LOGIC SURROUND AND DOLBY 3CH LOGIC
|
Use DOLBY
PRO LOGIC SURROUND
when rear speakers
are connected,and DOLBY 3CH LOGIC when rear speakers
are not connected.
For correct surround reproduction, be sure to perform follow-
ing adjustments
*The surround effect is better when using video and audio
software bearing the Diifsatsysunous) mark.
[LEVEL ADJUSTMENT
]
1,
Use SURROUND MODE button to select DOLBY
PRO LOGIC SURROUND or use the DOLBY 3CH
LOGIC button to switch DOLBY 3CH LOGIC ON.
2.
Adjust MASTER VOLUME to suitable listening level.
3.
Press the CENTER MODE button on the remote
control unit.
-DOLBY PRO LOGIC SURROUND;
NORMAL,WIDE,PHANTOM
*DOLBY 3CH LOGIC;NORMAL,
WIDE
4.
Press the TEST TONE button on the remote control
unit.
5.
Use the CENTER LEVEL(+/-)buttons and REAR
LEVEL(+/-)buttons to adjust center and rear
speaker
volume
levels until they are the same
as the front speaker's volume level.
6.
Press the TEST TONE button on the remote control
unit and switch the test tone to off position.
SURROUND MODE
DOLBY 3CHLOGIC
= DOLBY PRO aoe
+
"==
i]
nd
O
¢
5
<=.
[OPERATION
|
1.
Select
DOLBY PRO LOGIC SURROUND with the
SURROUND
MODE button or select DOLBY 3CH
LOGIC with the DOLBY 3CH LOGIC button.
2.
Select the component for playback with the input
selector buttons.
3.
Select CENTER MODE with the CENTER MODE
button on the remote control unit.
4.
Begin playback.
5.
Adjust volume level with the MASTER VOLUME
control.
When using DOLBY PRO LOGIC SURROUND, you can set
the delay time between 15ms and 30ms.The standard set-
ting is 20rns,but you can select any setting of your choice.
Delay time changes each time you press the DELAY TIME
button.The delay time is indicated in the display section.
14
<ARB1488>
Ze