Pioneer DVJ-X1 - Professional DVD Turntable Учебное пособие - Страница 31

Просмотреть онлайн или скачать pdf Учебное пособие для DVD-плеер Pioneer DVJ-X1 - Professional DVD Turntable. Pioneer DVJ-X1 - Professional DVD Turntable 38 страниц. Dvd video deck

<Supplements>
¶ How to designate an address for a search
There are the following four ways of designating an address for a search:
Address Block
When the BK command is issued, the address mode is set to block (During CD playback: absolute time [AMIN:ASEC:
AFRAME], during DVD playback: sector).
Example: During CD playback: For searching 2 min 3 sec 4 frame, designate BK20304SE
During DVD playback: For searching 250000 sector, designate BK250000SE.
As the sector for the innermost track of a DVD is 196608 (30000 h = 0 LBA), a number less than this cannot be
designated.
Address Track
When the TR command is issued, the address mode is set to track. This command is available only for a CD.
Example: For searching the 5th piece of music, designate TR5SE.
Address Index
When the IX command is issued, the address mode is set to index (TNO:INDEX). This command is available only for a CD.
Example: For searching Index 3 of the 2nd piece of music, designate IX203SE.
Address Time
When the TM command is issued, the address mode is set to time (absolute time, AMIN:ASEC). This command is available
only for a CD.
Example: For searching 2 min 3 sec, designate TM203SE.
Once the address mode is set, it will be retained until it is changed the next time.
¶ How to calculate the error rate (Error count)
The error rate between the current point and the designated address is calculated.
Example: To calculate the error rate between 20 min 0 sec 0 frame and 21 min 0 sec 0 frame and to display the result
during CD playback: BK200000SE210000EC?E
To calculate the error rate between 40000H and 41000H and to display the result during DVD playback:
262144SE266240EC?E (designated in decimal)
¶ How to start up the servos manually
Servo operations can be controlled manually in detail.
Note that incorrect use of test-operation commands may damage the player.
To start up the servos manually, the following commands must be executed in the order shown here:
10TM : For starting CD, select CD.
11TM : For starting DVD, select DVD.
1TM
: To turn on the laser diode (CD)
9TM
: To detect installation of a disc
3TM
: To turn on the spindle (2000 rpm)
9TM
: Disc-search
2TM
: To turn on the focus servo
12TM : For rough focus-position adjustment
13TM : For tracking-balance adjustment
4TM
: To turn on the tracking servo
12TM : For focus-position adjustment
15TM : For focus-gain adjustment
16TM : For tracking-gain adjustment
6TM
: To start reading at an address
0TM
: To turn off the servos
¶ Description of other commands
TOC Information Request
TOC information regarding a CD is in the following format:
Example: In case of 0116704307: Starting track No. = 01, Ending track No. = 16, Recorded time: 70:43:07
Multi Jump Fwd/Rev
The address is jumped by the designated number of tracks toward the innermost/outermost track of the disc (physical track,
not number of pieces of music).
Example: To jump by 100 tracks from the current point toward outermost track: 100MF
Slider Move Fwd/Rev
The slider is moved by about 11.1875 µm toward the outermost/innermost track. You can move the slider to your desired
position by executing this command repeatedly.
Select one or the other.
31