Pioneer PDP-S20-LR Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Акустическая система Pioneer PDP-S20-LR. Pioneer PDP-S20-LR 33 страницы.

English

CONNECTION TO A PLASMA DISPLAY

1 Connecting the speaker cables

1 Switch off the power of the plasma display.

2 Connect the input terminals of the speaker system and

the speaker output terminals of the plasma display with

the accessory speaker cable. Make sure the positive (ª)

and negative (·) terminals match when connecting.

1. Push the lever, insert the cable into the hole, and release

the lever.

· terminal (black) ª terminal (red)

Black

To the· terminal

(Speaker input terminals of the speaker system)

2. For the output terminals on the plasma display, push the

lever, insert the cable into the hole, and release the lever.

ª · · ª

Speed clamps are included with the plasma display for

tidying your cables and keeping extra cable length out of the

way.

Speaker cable

Input terminal of speaker

Red

To the ª terminal

Output terminal of plasma

display

Wiring clamp

÷ After connection to the terminals, pull lightly on the cable

to confirm that the tips of the cable are properly con-

nected to the terminals. An imperfect connection can

cause sound interruptions and noise.

÷ When cable cores stick out and ª and · lines are short-

circuited, an excessive load will be applied to the plasma

display and the operation will stop or trouble will be

caused.

÷ When the polarity is reversed for one speaker (left or right)

at the time of connection to the plasma display, the bass

reproduction will be reduced, the sound positioning will

be lost, and a correct stereo effect will not be obtained.

Speed clamps

Use the supplied wiring clamp to hide

the cables from view.

Speaker cable