Pioneer S-LF3-F Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Акустическая система Pioneer S-LF3-F. Pioneer S-LF3-F 4 страницы. Pioneer s-lf3-f: operating guide

Печатать страницу

S-LF3-F

IMPORTANT NOTICE:

The serial number for this equipment is located on the rear. Please write this serial number on your

warranty and keep it in a secure area for future reference.

BEFORE USE

• Thank you for buying this Pioneer product.

• Please read through this operating guide before

using your speaker system so you will know how

to optimize performance. After you have finished

reading the operating guide, store it in a safe place

for future reference.

• The rated impedance of this speaker system is 8

. It must be connected to an amplifier which

accepts this type of load (minimum and maximum

impedances accepted by the amplifier are gener-

ally indicated near the loudspeaker outlets: for

example "4-16 " or "6-16

• To guard against damage to this speaker system

due to an electric power overload, take the follow-

ing precautions:

• Do not supply power to the speaker system in

excess of the maximum permissible input.

• When connecting or disconnecting cables, be

sure the amplifier power is OFF.

• When using a graphic equalizer, do not use

excessive amplifier volume.

• Do not try to force a low-powered amplifier to

produce loud sound (the amplifier's distortion

will be increased, and you may damage the

tweeter).

• Avoid touching the diaphragms and suspen-

sions of the speaker units as they are fragile.

").

OPERATING GUIDE

SPEAKER SYSTEM

NOTE:

The speaker units in this speaker system

are magnetically shielded. However, colours

may blur if the speakers are positioned too

close to a television screen. If this happens,

switch off the television and switch it back

on again after 15 to 30 minutes. If the

problem persists, move the speakers away

from the television set.

INSTALLATION PRECAUTIONS

• The S-LF3-F system is composed of 2 identical

front speakers.

• For optimum sound reproduction of high frequen-

cies, the treble speaker units must be at the same

height as the listener's ears.

• For low frequencies, it is possible to increase the

level of bass sounds by positioning the speakers

close to a wall (the maximum increase being

obtained for a position in a corner of the listening

room).

• Do not install these speakers close to an oven or

heating appliance. Avoid exposing them to direct

sunlight. High temperature can distort the struc-

ture of the enclosure and adversely affect the

sound.

• These speakers are heavy and fragile, therefore it

is dangerous to install them in an unstable posi-

tion.