Pioneer VSX-S300-k Инструкции по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации для Акустическая система Pioneer VSX-S300-k. Pioneer VSX-S300-k 36 страниц. Audio/video multi-channel receiver
Также для Pioneer VSX-S300-k: Краткое руководство по эксплуатации (33 страниц)

Печатать страницу

Pioneer VSX-S300-k Инструкции по эксплуатации

Connecting your equipment

Be careful to connect the terminal in the proper direction.

Note

• Set the HDMI parameter in Setting the Audio options on

page 24 to THRU (THROUGH), if you want to hear HDMI

audio output from your TV (no sound will be heard from

this receiver).

• If the video signal does not appear on your TV, try

adjusting the resolution settings on your component or

display. Note that some components (such as video game

units) have resolutions that may not be displayed. In this

case, use a (analog) composite connection.

• When the video signal from the HDMI is 480i, 480p, 576i

or 576p, Multi Ch PCM sound and HD sound cannot be

received.

About HDMI

The HDMI connection transfers uncompressed digital video,

as well as almost every kind of digital audio that the

connected component is compatible with, including DVD-

Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD,

DTS-HD Master Audio (see below for limitations), Video CD/

Super VCD and CD.

This receiver incorporates High-Definition Multimedia

Interface (HDMI

) technology.

This receiver supports the functions described below through

HDMI connections.

• Digital transfer of uncompressed video (contents

protected by HDCP (1080p/24, 1080p/60, etc.))

• 3D signal transfer

• Deep Color signal transfer

• x.v.Color signal transfer

• Audio Return Channel

• Input of multi-channel linear PCM digital audio signals

(192 kHz or less) for up to 8 channels

• Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate

audio (Dolby TrueHD, DTS-HD Master Audio), DVD-

Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD

• Synchronized operation with components using the

Control with HDMI function (see Control with HDMI

function on page 31)

Note

• Use a High Speed HDMI

cable. If HDMI cable other than

a High Speed HDMI

cable is used, it may not work

properly.

• When an HDMI cable with a built-in equalizer is

connected, it may not operate properly.

• 3D, Deep Color, x.v.Color signal transfer and Audio

Return Channel are only possible when connected to a

compatible component.

• HDMI format digital audio transmissions require a longer

time to be recognized. Due to this, interruption in the

audio may occur when switching between audio formats

or beginning playback.

• Turning on/off the device connected to this unit's HDMI

OUT terminal during playback, or disconnecting/

connecting the HDMI cable during playback, may cause

noise or interrupted audio.

HDMI, the HDMI Logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC in the United States and other countries.

"x.v.Color" and

are trademarks of Sony

Corporation.

Analog audio cables

Use stereo RCA phono cables to connect analog audio

components. These cables are typically red and white, and

you should connect the red plugs to R (right) terminals and

white plugs to L (left) terminals.

A U D

I O

White (Left)

Red (Right)

Digital audio cables

Commercially available coaxial digital audio cables or optical

cables should be used to connect digital components to this

receiver.

C O A

X I A

Coaxial digital

audio cable

I N

Optical cable

Note

• When connecting optical cables, be careful when

inserting the plug not to damage the shutter protecting

the optical socket.

• When storing optical cable, coil loosely. The cable may be

damaged if bent around sharp corners.

• You can also use a standard RCA video cable for coaxial

digital connections.

Standard RCA video cables

These cables are the most common type of video connection

and are used to connect to the composite video terminals.

The yellow plugs distinguish them from cables for audio.

V I D

E O

Yellow

About video outputs connection

This receiver is not loaded with a video converter. When you

use HDMI cables for connecting to the input device, the

same cables should be used for connecting to the TV.

The signals input from the analog (composite) video inputs of

this unit will not be output from the HDMI OUT.

O P T

I C A

I N