Ariston LFO 3P31 WL X Ежедневное справочное руководство - Страница 5
Просмотреть онлайн или скачать pdf Ежедневное справочное руководство для Посудомоечная машина Ariston LFO 3P31 WL X. Ariston LFO 3P31 WL X 8 страниц.
Печатать страницу
LOADING THE RACKS
CUTLERY RACK
Knives and other utensils with sharp edges must be positioned
with the blades facing downwards.
UPPER RACK
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold
or unfold to optimize the arrangement
of crockery inside the rack. Wine
glasses can be placed safely
in the foldable flaps by inserting
the stem of each glass into
the corresponding slots.
Depending on the model:
• to unfold the flaps there is needed
to slide it up and rotate or release
it from the snaps and pull it down.
• to fold the flaps there is needed
to rotate it and slide flaps down
or pull it up and attach flaps to the snaps.
The third rack was designed
to house the cutlery.
Arrange the cutlery as shown
in the figure.
A separate arrangement
of the cutlery makes collection
easier after washing and improves
washing and drying performance.
The geometry of the rack makes
it possible to place such small
items as coffee cups in the area
in the middle.
The cutlery basket is equipped with
two sliding side trays to make the
most of the height of the space
below and enable the loading of
high items into upper rack.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
The
upper
rack
has
supports which can be used in a
vertical position when arranging
tea/ dessert saucers or in a lower
position to load bowls and food
containers.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place bulky
crockery in the lower basket and low position to make the most of the
tip-up supports by creating more space upwards and avoid collision with
the items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers A at the sides of the rack and move
the basket downwards.
We strongly recommend that you do not
adjust the height of the rack when it is loaded.
NEVER raise or lower the basket on one side
only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower)
to load pans and salad bowls easily.
The lower rack has a Space Zone A, a special pull-out support
in the rear of the rack that can be used to support frying pans
or baking pans in upright position, thus taking up less space.
In order to use it, just get hold of the coloured grip and pull it upwards
B while rotating it forward. The supports can slide right and left to fit
the size of the crockery.
tip-up
(loading example for the lower rack)
ZONE WASH 3D
Zone Wash 3D uses additional water jets
located both: in the lower and upper part
of the dishwasher (marked with orange color)
to wash more intensively heavily soiled items
by increasing water coverage on dishes.
Example: Load pots and casseroles facing lower
part of Zone Wash 3D components and activate
the Zone Wash 3D option on the panel.
EN
B
A
5