AEONTEC ZW096 Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Блок управления AEONTEC ZW096. AEONTEC ZW096 9 страниц. Low-cost z-wave switch plugin module specifically used to enable z-wave command and control (on/off) of any plug-in too

Печатать страницу

Aeon Labs Smart Switch is a Z-Wave power binary switch device based on Z-Wave enhanced 232 slave library

V6.51.06.

Its surface has the Smart RGB LEDs on, which can be used for indicating the output load status, the strength of

wireless signal. You can also configure its indication colour according to your favour.

It can be included and operated in any Z-wave network with other Z-wave certified devices from other

manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters

regardless of vendor to increase reliability of the network.

It is also a security Z-wave device and supports the Over The Air (OTA) feature for the product's firmware upgrade.

As soon as Smart Switch is removed from a z-wave network it will be restored into default factory setting.

1. Library and Command Classes

1.1 SDK: 6.51.06

1.2 Library

Basic Device Class: BASIC_TYPE_ROUTING_SLAVE

Generic Device class: GENERIC_TYPE_SWITCH_BINARY

Specific Device Class: SPECIFIC_TYPE_POWER_SWITCH_BINARY

1.3 Commands Class

Included Non-Secure Network

Node Info

COMMAND_CLASS_ZWAVEPLUS_INFO V2

Frame

COMMAND_CLASS_SWITCH_BINARY V1

COMMAND_CLASS_CONFIGURATION V1

COMMAND_CLASS_SWITCH_ALL V1

COMMAND_CLASS_CLOCK V1

COMMAND_CLASS_METER V3

COMMAND_CLASS_SWITCH_MULTILEVEL,

COMMAND_CLASS_COLOR_SWITCH,

COMMAND_CLASS_ASSOCIATION_GRP_INFO V1

COMMAND_CLASS_ASSOCIATION V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC V2

COMMAND_CLASS_VERSION V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD V2

COMMAND_CLASS_POWERLEVEL V1

COMMAND_CLASS_SECURITY V1

COMMAND_CLASS_MARK V1

COMMAND_CLASS_DEVICE_RESET_LOCALLY V1

COMMAND_CLASS_HAIL V1

Security

- - - -

Command

Supported

Report