Ariston LI 670 Руководство по ремонту - Страница 23

Просмотреть онлайн или скачать pdf Руководство по ремонту для Посудомоечная машина Ariston LI 670. Ariston LI 670 33 страницы.

18. HEATER ASSEMBLY Cont.

• With the Drain Motor removed, remove the two Heater Assembly Clamps (Fig. 18-3) and then gently separate the Heater

Assembly from the two (2) Hoses.

OPERATION: The Heater is a Flow-Through design that also incorporates an internal High Limit (Fig. 18-4). Both the Heating

Element and the High Limit can be checked for continuity, but the Heater is replaced as a complete assembly.

19. TURBIDITY SENSOR

• The LI 670 and LI 700 Dishwasher models incorporate a Turbidity Sensor that measures water clarity and may adjusts cycle times

if required. The Turbidity Sensor is a small PC Board mounted inside a black housing attached to the input of the Heater Assembly

Hose. To replace, simply open the housing and remove the PC Board.

REPAIR MANUAL

Fig. 18-3

(LI 670 / LI 700 Models Only)

Fig. 19-1

L 63 / LL 64 / LL 65

LI 640 / LI 670 / LI 700

Fig. 18-4

Fig. 19-2

Page: 18