Ariston LSFE 1B19 S Ежедневное справочное руководство - Страница 5

Просмотреть онлайн или скачать pdf Ежедневное справочное руководство для Посудомоечная машина Ariston LSFE 1B19 S. Ariston LSFE 1B19 S 8 страниц.

Печатать страницу

LOADING THE RACKS

UPPER RACK

Load delicate and light dishes: glasses,

cups, saucers, low salad bowls.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper basket can be adju-

sted: high position to place bulky crockery in

the lower basket and low position to make the

most of the tip-up compartments by creating

more space upwards.

The upper rack is equipped with a Upper

Rack height adjuster (see figure), without

pressing the levers, lift it up by simply holding

the rack sides, as soon as the rack is stable

in its upper position. To restore to the lower

position, press the levers (A) at the sides of the

rack and move the basket downwards.

We strongly recommend that you do not adjust the height of the

rack when it is loaded.

NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be fold or unfold

to optimize the arrangement of crockery inside

the rack.

Wine glasses can be placed safely in the foldable

flaps by inserting the stem of each glass into

the corresponding slots.

Depending on the model:

• to unfold the flaps there is needed to slide

it up and rotate or release it from the snaps

and pull it down.

• to fold the flaps there is needed to rotate

it and slide flaps down or pull it up and attach

flaps to the snaps.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery

etc... Large plates and lids should ideally

be placed at the sides to avoid interferen-

ces with the spray arm.

(loading example for the lower rack)

CUTLERY BASKET

It is fitted with top grids for improved cutlery arrangement. It must

only be positioned at the front of the lower rack.

Knives and other utensils with sharp edges must be placed in the

cutlery basket with the points facing downwards or they must be

positioned horizontally in the tip-up compartments on the upper

rack.