Ariston 100 L Техническое руководство - Страница 39
Просмотреть онлайн или скачать pdf Техническое руководство для Водонагреватель Ariston 100 L. Ariston 100 L 39 страниц. Heat pump water heater split
Печатать страницу
Other materials (not supplied):
5 pin power cable (4 x 0,75 mm² + ground cable) long enough for the connection between internal and external units
5 pin power cable (4 x 0,75 mm² + ground cable) long enough for the connection between internal and external units
5 pin power cable (4 x 0,75 mm² + ground cable) long enough for the connection between internal and external units
•
Hole saw for concrete ø60 mm, if the installation involves making a hole
Hole saw for concrete ø60 mm, if the installation involves making a hole
•
Pipes and fittings for hydraulic connection
Pipes and fittings for hydraulic connection
•
Rawlplugs and screws specific for concrete walls, for external unit installation
and screws specific for concrete walls, for external unit installation
•
Rawlplugs, bichromatic screws, nuts and washers (M10, M12 or M14) specific for concrete wa
s, bichromatic screws, nuts and washers (M10, M12 or M14) specific for concrete walls, for internal unit
s, bichromatic screws, nuts and washers (M10, M12 or M14) specific for concrete wa
•
installation
It is mandatory to fit a safety valve onto the appliance's water inlet pipe. The device must comply with the EN
It is mandatory to fit a safety valve onto the appliance'
•
1487:2002 standard and must have a maximum pressure of 0.7 Mpa (7 bar). Moreover, it must at least include the
1487:2002 standard and must have a maximum pressure of 0.7 Mpa (7 bar). Moreover, it must at least include the
1487:2002 standard and must have a maximum pressure of 0.7 Mpa (7 bar). Moreover, it must at least include the
following components: a cut-off valve, a non
valve and a water pressure shut-off device
Safety devices like thermostatic mixing valve, pressure reducer, expansion vessel
afety devices like thermostatic mixing valve, pressure reducer, expansion vessel
•
Generic tools: screwdrivers, meter, driller, cutter, scissors, gloves, 1/2" torque wrenches, Teflon...
Generic tools: screwdrivers, meter, driller, cutter,
•
Available installation accessories
Internal unit
SAFETY HYDRAULIC GROUP
FLOOR STANDING SUPPORT KIT FOR EXTERNAL UNIT
FLOOR STANDING SUPPORT KIT FOR EXTERNAL UNIT
External unit
WALL HUNG SUPPORT KIT FOR
WALL HUNG SUPPORT KIT FOR EXTERNAL UNIT
It Is mandatory to clean the evaporator on an annual basis in order to remove any dust or obstructions
It Is mandatory to clean the evaporator on an annual basis in order to remove any dust or obstructions
It Is mandatory to clean the evaporator on an annual basis in order to remove any dust or obstructions. To access the
•
evaporator, placed on the external unit, it is necessary to remove the fixing screws of the grid casing; clean the evaporator
evaporator, placed on the external unit, it is necessary to remove the fixing screws of the grid casing; clean the evaporator
evaporator, placed on the external unit, it is necessary to remove the fixing screws of the grid casing; clean the evaporator
with a flexible brush taking care not to damage it.
with a flexible brush taking care not to damage it.
In the case you found some bended fins, straighten them with a special comb, according to the fins spacing (1.6mm).
In the case you found some bended fins, straighten them with
•
Still on external unit, ensure that the condensate water runs out in a suitable drain and make sure the discharge is made
Still on external unit, ensure that the condensate water runs out in a suitable drain and make sure the discharge is made
Still on external unit, ensure that the condensate water runs out in a suitable drain and make sure the discharge is made
•
without hindrance.
The pressure safety device must be operated regularly to verify that it is not clogged and to remove any lime scale
The pressure safety device must be operated regularly to ver
•
deposits.
Check that the condensate drainage pipe is not obstructed.
Check that the condensate drainage pipe is not obstructed.
•
This product conforms to EU Directive 2002/96/EC.
The barred dustbin symbol appearing on the appliance's data plate indicates that the product must be disposed of separately from household waste
The barred dustbin symbol appearing on the appliance's data plate indicates that the product must be disposed of separately f
The barred dustbin symbol appearing on the appliance's data plate indicates that the product must be disposed of separately f
once it reaches the end of its lifespan, and transferred to a waste disposal site for electric and electronic equipment, or returned to the dealer when
once it reaches the end of its lifespan, and transferred to a waste disposal site for electric and electronic e
purchasing a new appliance of the same kind. The user is responsible for delivering the decommissioned appliance to a suitable waste disposal site. Proper
purchasing a new appliance of the same kind. The user is responsible for delivering the decommissioned appliance to a suitabl
purchasing a new appliance of the same kind. The user is responsible for delivering the decommissioned appliance to a suitabl
separated collection of the decommissioned appliance and its successive eco-compatible recycling, treatment and disposal contributes to preventing negative
separated collection of the decommissioned appliance and its
effects on the environment and health and favors the reuse of the materials comprising the product. For further details on th
effects on the environment and health and favors the reuse of the materials comprising the product. For further details on th
effects on the environment and health and favors the reuse of the materials comprising the product. For further details on the available waste collection
systems, contact your local waste disposal office, or the dealer from which the product was purchased.
s, contact your local waste disposal office, or the dealer from which the product was purchased.
off valve, a non-return valve, a control mechanism for the non
return valve, a control mechanism for the non-return valve, a safety
off device; together with a dripping water discharge pipe.
scissors, gloves, 1/2" torque wrenches, Teflon...
GROUP (For inlet pipe 1/2'' )
APPENDIX B: ROUTINE MAINTENANCE
APPENDIX B: ROUTINE MAINTENANCE
s water inlet pipe. The device must comply with the EN
a special comb, according to the fins spacing (1.6mm).
ify that it is not clogged and to remove any lime scale
compatible recycling, treatment and disposal contributes to preventing negative
39
quipment, or returned to the dealer when
□
□
□
□
□
□
□
□