Ariston AXIOS LUX ECO Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водонагреватель Ariston AXIOS LUX ECO. Ariston AXIOS LUX ECO 10 страниц.

Different Mode Settings

Set Manual Mode:

(Fig.4) is on when heating. Manual mode allows the user to set the desired

temperature by pressing the "+" and "-" buttons until the desired temperature is

indicated on the display (the setting range is 40°C-70°C). Pressing "SET" button

will store the setting and the product will start operating in "Manual" mode.

Set Timer Mode:

programmed independently of each other. The time can be set in 30 minute

intervals.

1. Program 1, T1: Press "T1" button. LED "e" (Fig.4) will switch on to confirm the

mode activation. Default set time is 05:00.

To set the temperature and to change the default time, hold the 'T1' button for 3

seconds, the time will start blinking. Change the time by pressing "+" and "-" and

then press "SET" to confirm. The next step is to set the desired water temperature

between 40°C and 70°C, by pressing the "+" / "-" buttons and then pressing the

"SET" button to save. The device will start working in "T1" mode.

2. Program 2, T2: Press "T2" button. LED "f" (Fig.4) will switch on to confirm the

mode activation. Default set time is 16:00.

To set the temperature and to change the default time, hold the 'T2' button for 3

seconds, the time will start blinking. Change the time by pressing "+" and "-" and

then press "SET" to confirm. The next step is to set the desired water temperature

between 40°C and 70°C, by pressing the "+" / "-" buttons and then pressing the

"SET" button to save. The device will start working in "T2" mode.

3. Program 3, T1 and T2: Press both "T1" and "T2" buttons. The LEDs near the

buttons will switch on to confirm the mode is active.

When both "T1" and "T2" functions are on, the time and temperature setting must

be repeated twice, one for the time, T1 and another for the time, T2.

For periods when the hot water usage is not planned, the water heater is

deactivated.

Set Eco Evo Mode

(Fig 4) will be lit to confirm the mode is active. In this mode, the temperature is

automatically set by the product itself and as a result, "+"/ "-" and "SET" buttons

are deactivated. If pressed, the display will show "Eco" for three seconds. No

temperature adjustment is allowed in this mode. To adjust the temperature, it is

necessary to deactivate the 'Eco Evo' mode. For deactivating this mode, press

the 'ECO EVO' button again and the relevant blue LED will switch off.

Default mode. In this mode, only the "HEATING" LED "g"

There are three different timer programs which can be

: Press 'ECO EVO' button to activate this mode. The LED "d"

- 6 -