Aeotec ZWA019 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Aeotec ZWA019. Aeotec ZWA019 9 страниц. Water sensor
Также для Aeotec ZWA019: Руководство (3 страниц), Руководство пользователя (13 страниц), Руководство пользователя (9 страниц)

Tampering

Water protection

Button Function.

Push Type

Long Press 5s

Long Press 10s

Short Press

3 Times Short Press

Advanced Functions.

Communication test.

This utilizes the Power Level command class to determine the health between the Water Sensor 7 and your Z-Wave

gateway. This will tell you if the Water Sensor 7 has a healthy connection to your system and is a great method of

debugging connectivity issues.

1. Set Parameter #4 to value #1

2. Double click the Tamper Switch.

3. Result:

Green LED blinks once - success

Red LED blinks 3x times - failure

Firmware-Update over the Air.

This device is capable of receiving a new firmware 'over the air'. The update function needs to be supported by the central

controller. Once the controller starts the update process, perform the following action to confirm the firmware update:

1. Wake Up the device by removing the cover.

2. The hit the tamper switch once.

Send a wake up notification.

In order to send your sensors new configuration commands from your Z-Wave controller or gateway, it will need to be

woken up.

1. Wake Up the device by removing the cover.

2. The hit the tamper switch once.

Note: Water Sensor 7 remains awake until the housing is closed again.

If either Tamper Switch 1 or 2 is activated the device blinks red

one time with ½ second duty cycle if within range of Controller.

The device blinks red three times with ½ second duty cycle if out of

range of Controller

When operation button is Short Pressed the LED illuminates red

three seconds in case of Water Leakage detected and Green if

no Leakage detected.

Function

Description

Pending reset

LEDs start indication Waiting for Reset.

Reset

Initiates Device Reset Locally.

Tamper

Sends Wake Up notification.

Sequence

See Learn Mode.