Dingtek DF702 Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Датчики безопасности Dingtek DF702. Dingtek DF702 14 страниц.

θ3

θ3=0

θ3>15°

Figure 5.7

Figure 5.8

Before the installation, the test can be simulated by pouring the device.

For example, if you tilt the device so that the tilt angle is greater than 15°, you

can see that the trigger device reports the dump alarm data.

Note: The standard version does not have this feature, only enhanced version

with this feature.

5.1.3 Actual installation

Step 1 Confirm that the frequency band of the gateway is the same as the

frequency band of the device.

Step 2 Add devices and gateways on the network server to add related

information for the device: APB mode needs to be: Devaddr, Nwkskey, and

Appskey information, and OTAA mode needs to be: Deveui, Appeui, and APPkey

information. This information has been printed on the label.注：不同的 The

network server may have different requirements, and specific information is

filled in according to the requirements of the web server.

Step 3 Open the device, referring to step 5.1.1 step 2;

Step 4 Connect the power supply, referring to step 5.1.1 of step 3.

Refer to 5.1.2 Functional Test

5.2.3 Actual installation

Refer to 5.1.3 Actual installation

Beijing Dingtek Technology Corp., Ltd.

Tel:86-10-64718863,64753700

http://www.dingtek.com

Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022

Page