Ariston Genus 27 Plus Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Котел Ariston Genus 27 Plus. Ariston Genus 27 Plus 12 страниц. Type c boiler
Также для Ariston Genus 27 Plus: Руководство по установке (24 страниц)

Ariston Genus 27 Plus Руководство пользователя
8
Automatic
Operation
= ON
= OFF
The switching
times corres-
pond to the
program
entered.
Entering the switching times
You have 20 memory Iocations available. Each switching time takes up
one memory location.
Keep pressing the "Prog" key until a free memory location is shown in
the display "– –:– –".
Programme ON or OFF with the "
"
"= OFF; "
"= ON
Enter the hour using "h"
Enter the minutes using "m"
If a switching command is to be carried out every day (1 2 3 4 5 6 7)
then store using the "
carried out by using the "Day" key.
When the day seIection is left bIank, the programmed switching
instruction operates at the same time every day
1 2 3 4 5 6
1 2 3 4 5
6 7
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the "
The time switch enters the automatic operating mode and displays the
current time of day.
Begin any further entry of a switching time with the "Prog" switch. If
your entry is incomplete, the segments not yet selected will blink in the
display. After programming is completed, and you return the time clock
to the current time display with the "
activate any switching instruction required for the current time.You may
need to manually select the desired switching state with the "
key. Thereafter, as the unit encounters further switching instructions in
the memory in real time, it will correctly activate all subsequent
switching instructions.
Manual Override Switch "
With the "
" you can change the current setting at any time. The
switching program already entered is not altered.
Manual
Operation
= ON
= OFF
If the current
switching mode is
changed manually,
the next switching
time will be
carried out auto-
matically again
according to the
entered switching
program.
" key, otherwise select the day(s) it is to be
= Monday – Saturday
= Monday – Friday
=Saturday – Sunday
" key.
"
Continuous
Operation
= Continuously ON
= Continuously OFF
You can only
return to automatic
mode from the
continuously-ON
and continuously-
OFF
switching
modes by
pressing the "
key.
" key:
" key, the time clock will not
"
UT008An
"
403