Ariston GENUS PREMIUM EVO HP 100 Инструкции по проектированию, установке и обслуживанию - Страница 13

Просмотреть онлайн или скачать pdf Инструкции по проектированию, установке и обслуживанию для Котел Ariston GENUS PREMIUM EVO HP 100. Ariston GENUS PREMIUM EVO HP 100 44 страницы. Wall-hung condensing gas boiler hp
Также для Ariston GENUS PREMIUM EVO HP 100: Руководство пользователя (17 страниц), Руководство пользователя (24 страниц), Руководство пользователя (32 страниц)

Gas connection

The boiler was designed to use gases belonging to the categories

as shown in the following table.

COUNTRY

MODEL

GENUS PREMIUM EVO HP 45

GENUS PREMIUM EVO HP 65

GENUS PREMIUM EVO HP 85

GENUS PREMIUM EVO HP 100

GENUS PREMIUM EVO HP 115

GENUS PREMIUM EVO HP 150

Make sure, using the labels on the packaging and the data plate on

the appliance itself, that the boiler is in the correct country and that

the gas category for which the boiler was designed corresponds to

one of the categories available in the country where it will be used.

The gas supply piping must be created and measured out in

compliance with specifi c legal requirements and in accordance

with the maximum power of the boiler; you should also make sure

that the shut-off valve is the right size and that it is connected

correctly.

Before carrying out the installation, it is recommended that the

fuel pipes are cleaned thoroughly in order to remove any residues

which could prevent the boiler from operating correctly.

Check that the supplied gas corresponds to the type of gas for

which the boiler was designed (see the data plate located on the

appliance itself ).

It is also important to check that the pressure of the gas (methane

or LPG) you will be using to feed the boiler is suitable, because if it

is insuffi cient the power of the generator may be reduced, causing

inconvenience for the user.

The illustration shows the connections for the water and gas

attachments of the boiler.