Cal Flame FPR 4000 Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Крытый камин Cal Flame FPR 4000. Cal Flame FPR 4000 14 страниц.
Печатать страницуSafety Instructions
Read this before installing or operating your new Cal Flame fireplace.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
injury or property damage. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment. Unless specifically recommended in
this manual, do not repair or replace any part of your fireplace. Have a qualified technician
perform all service -- any repairs made by an unqualified technician will void your warranty.
Most cities and counties require permits for exterior construction and gas lines. In addition, some
communities have codes requiring residential barriers such as fencing and/or self-closing gates on property to prevent
unsupervised access to the property by children under the age of 5. Your local code compliance office can provide
information on which permits may be required and how to obtain them prior to the delivery of your fireplace.
Placement and Location
•
Cal Flame™ FRP4000 fireplace is designed for
outdoor use only .
•
Never locate this appliance in a building, garage, or
any other enclosed room or under a sealed overhead
structure, or in any type of enclosed area such as a
garage, shed, or breezeway. Keep clear of trees and
shrubs.
•
Do not place fireplace under or near windows or
vents that can be opened into your home.
•
Maintain sufficient distance as to not overheat any
overhead combustible material such as a patio
cover.
•
The area surrounding your fireplace should be
kept clean and free from flammable liquids and
other combustible materials such as mops, rags or
brooms, as well as solvents, cleaning fluids, and
gasoline.
•
Do not block the vents located near the base of your
fireplace as gas may build up in case of leak and
cause serious damage.
•
Do not install or operate your fireplace in such a
manner that the cross ventilation openings are
blocked. Fresh air must be able to pass though
installed vents to safeguard against residual gas
accumulation. Failure to allow proper ventilation
may cause fire or explosion.
•
Do not locate appliance where it can get excessively
wet. Do not use this appliance if any part has been
underwater.
Immediately call a qualified service
technician to inspect the unit and to replace any part
of the control system and any gas control which has
been underwater.
FRP 4000 Fireplace Owner's Manual
LTR20081045, Rev. A
Set-Up
•
You are responsible for ensuring that a natural
gas line (if required) is installed and safe for use.
We recommend that a licensed contractor install
your fireplace.
•
Installation must conform to local codes, or in the
absence of local codes, with either the National
Fuel Gas Code, ANSI Z223.1 / NFPA54, Natural
Gas and Propane Installation Code, CSA B149.1,
or Propane Storage and Handling Code, B149.2),
as applicable.
•
To prevent fire and smoke damage, remove all
packaging material before operating the fireplace.
Operation
•
Do not use charcoal or other solid fuel in a gas
burning fireplace.
•
Do not use your fireplace for cooking.
•
In the event that a burner goes out, turn burner
knobs to the full OFF position and let it air out. Do
not attempt to use the fireplace until the gas has had
time to dissipate.
•
Keep electrical supply cords away from the heated
areas of the fireplace.
•
Never use the fireplace in windy conditions. If used
in a consistently windy area a windbreak will be
required. Always adhere to the specified clearances
listed in this manual.
•
When handling LP gas line and connectors, do
not allow them to come in contact with any metal
surfaces. Do not drop LP connectors.
Safety Instructions
Page