Aeotec Siren 6 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Система безопасности Aeotec Siren 6. Aeotec Siren 6 6 страниц. Indoor siren
Также для Aeotec Siren 6: Краткое руководство по эксплуатации (7 страниц), Краткое руководство по эксплуатации (10 страниц)

Klaxon (Deep)

Warning Tone

Tornado Siren

Deep Alarm Tone

Alarm (Archangel tone)

Clock Buzzer

Christmas Tree

Single Bell Ting

Upwards Tone

Important safety information.

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited

may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be

held responsible for any loss or damage resulting from not following any instructions in this guide or in other

materials.

Keep product away from open ﬂames and extreme heat. Avoid direct sun light or heat exposure.

Siren 6 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations.

Warning: to prevent possible hearing damage, test only when wearing appropriate hearing protection.

Getting your Siren up and running is as simple as plugging it into a wall socket and linking it to your existing Z-Wave

network. The following instructions tell you how to link your Siren to your Z-Wave network via using Aeotec by Aeon

Labs' Z-Stick or Minimote controllers. If you are using other products as your main Z-Wave controller, such as a Z-

Wave gateway, please refer to the part of their respective manual that tells you how add new devices to your network.

Install Mounting plate in the location of your choice.

Alarm

Alarm (Shrill)

Digital Siren

Alert Series

Security

Gong

Tonal Pulse

Door Open

Safety

Security

Misc.