Aeotec Siren 6 Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Система безопасности Aeotec Siren 6. Aeotec Siren 6 7 страниц. Indoor siren
Также для Aeotec Siren 6: Руководство пользователя (6 страниц), Краткое руководство по эксплуатации (10 страниц)

Quick Start.

Getting your Siren up and running is as simple as plugging it into a wall socket and linking it to your

existing Z-Wave network. The following instructions tell you how to link your Siren to your Z-Wave

network.

Install Mounting plate in the location of your choice.

1. Affix Siren 6 Wall Mount Plate in any desired location near an outlet.

a. Use 3x 20mm screws or double-sided tape.

b. Lock the Siren 6 into place where the mount is installed.

Pairing your Siren 6 into your existing Z-Wave network.

1. Power Siren 6 through the provided power adapter.

2. Ensure that Siren 6 LED is blinking slowly.

3. Set your Z-Wave gateway into pair / add device mode. (Refer to your Z-Wave gateway/controller

instruction manual on how to set it into pair mode).

4. Tap the Siren 6 Action Button once (quick). (If your gateway supports S2 encryption, enter the

first 5 digits of the DSK into your Z-Wave gateway interface to complete S2 encrypted pairing, DSK

is printed on the Siren 6 unit).

5. If Siren 6 has successfully paired to your Z-Wave gateway, the LED on Siren 6 will emit a solid

color for 30 seconds, then turn off. If in the case that the Siren 6 failed to pair, LED will continue to

blink slowly.