Whirlpool 1CWTW4840 Руководство по эксплуатации и уходу - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Стиральная машина Whirlpool 1CWTW4840. Whirlpool 1CWTW4840 28 страниц.
Также для Whirlpool 1CWTW4840: Руководство по эксплуатации и уходу (28 страниц)

Whirlpool 1CWTW4840 Руководство по эксплуатации и уходу
7�
Select LOAD SIZE
Model 1CWTW4840 shown
Select the load size setting most suitable for your load. Small will
add a low amount of water for smaller loads and Super will add
the most amount of water for large or bulky loads. Items need to
move freely.
8�
Select TEMPERATURE
Model 1CWTW4840 shown
Once you select a cycle, select the desired wash temperature by
turning the Temperature knob to the appropriate setting based
on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than your
hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Cold
This is the temperature from your
faucet. If your tap cold water is very
cold, warm water may be added
to assist in soil removal and help
dissolve detergent.
8
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
9�
Select options, if desired
(on some models)
Model 1CWTW4840 shown
Select the desired cycle options. If you are using fabric
softener, be sure to select one of the Fabric Softener
Added-Yes options.
10�
Press START/Pause/Unlock
to begin wash cycle
Press the START/Pause/Unlock button to start the wash
cycle. When the cycle has finished, the DONE indicator will
light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
IMPORTANT: After the washer basket fills to the selected
water level, the lid must be closed before the wash cycle
can start. If filling stops with the lid open, close the lid and
press START button.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes, the water will pump
out automatically.