Whirlpool 4GWTW4740 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Стиральная машина Whirlpool 4GWTW4740. Whirlpool 4GWTW4740 27 страниц.
Также для Whirlpool 4GWTW4740: Руководство по установке (27 страниц), Руководство по эксплуатации и уходу (47 страниц), Руководство по установке (27 страниц)

Whirlpool 4GWTW4740 Руководство по установке

INSTALLATION INSTRUCTIONS

Before you start: remove shipping materials
It is necessary to remove all shipping materials for proper
operation and to avoid excessive noise from washer.
1.
Move washer
48"
(1.2 m)
Move washer to within 4 ft (1.2 m) of its final location; it must
be in a fully upright position.
NOTE: To avoid floor damage, set washer onto cardboard
before moving it and make sure lid is taped shut.
2.
Remove shipping base
To avoid damaging floor, place cardboard supports from
shipping carton on floor behind washer. Tip washer back, and
place on cardboard supports. Remove shipping base. Set
washer upright.
IMPORTANT: Removing shipping base is necessary for proper
operation. If your washer includes a sound shield, please refer
to the instructions included with the sound shield to install it at
this time.
3.
Remove packing tray from tub
Remove tape from washer lid, open lid and remove cardboard
packing tray from tub. Be sure to remove all parts from tray.
NOTE: Keep tray in case you need to move washer later.
4.
Free power cord
Firmly grasp power cord plug, and pull to free from rear panel.
Gently place power cord over console to allow free access
to back of washer.
5