Whirlpool AWG 5060 Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Стиральная машина Whirlpool AWG 5060. Whirlpool AWG 5060 4 страницы.

The door lock of your machine will automatically release about two minutes after the

programme has finished. You can open the door and take out the laundry by pulling

the door handle towards yourself.

After you have taken out the laundry leave the door open so that the machine interior

can dry.

Unplug the machine.

Turn off the water tap.

CANCEL A RUNNING PROGRAMME/SELECT A NEW PROGRAMME

If you want a certain programme in progress to finish early:

Press the start/pause button.

Turn the programme knob to STOP (Off / "O") status.

Turn the programme knob to "Draining" or "Spinning" programs.

The programme ready light will be on.

Run the program you have selected by pressing the start/pause button.

CHILD LOCK

Your machine is equipped with a child lock in order to prevent a programme's

operation from being affected by a push on a button during a wash operation. The

child lock will become active after pressing the first and third button from the left

simultaneously and for at least three seconds while a programme is running.

You can verify the activation of the child lock by checking lamps of the operation

buttons which will flash for two seconds. In order to deactivate it you will have to press

the same buttons at the same time. You can check whether it is deactivated by

checking out the start/pause lamp which will flash.

AUTOMATIC FAILURE DETECTION SYSTEM

Your machine is equipped with systems which will both take the necessary

precautions and warn you in case of any failure by controlling itself constantly during

the washing processes.

When a failure condition is detected, the "start/pause", "programme ready",

"programme end" lights blink according to a codification that identifies the failure

causes.

Refer to the "Troubleshooting Guide" in your Instructions for Use for the failure codes

and contact your After-Sales Service.