Whirlpool 20RI-D4 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Холодильник Whirlpool 20RI-D4. Whirlpool 20RI-D4 4 страницы.

USING THE APPLIANCE

FIRST USE

Connect the appliance to the water system and power supply (refer to the Installation manual).

When connecting the appliance to the power supply, the display will show the temperatures preset by the

manufacturer.

If the temperature indicator appears, accompanied by the acoustic alarm (which means that the long

black-out alarm has been activated), press the alarm reset button.

Note: After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a temperature

suitable for a standard appliance load is reached.

GUIDE TO SELECTING FUNCTIONS

Stand-by

This function turns off the refrigerator and freezer compartments. To activate the standby function, press

the button for 3 seconds: both displays will go off and a dash will appear on the left display. To reset the

function, carry out the same procedure until the previously set temperatures are displayed.

Note: Remember that this operation does not disconnect the appliance from the power supply.

Freezer temperature

The factory-set ideal temperature is -18°C. To change the temperature, press the

buttons until the

display shows the required value.

Refrigerator temperature

The factory-set ideal temperature is +5°C.

To change the temperature, press the

buttons until reaching the required value that it will be

displayed.

On/off

Use the on/off button to switch the ice maker on or off. When the ice maker is on, the display shows one

of the two

icons.

Mode

Press the mode button to select the type of ice desired: crushed

or cubes

Downloaded from Fridge-Manual.com Manuals