3Com 3CRWE725075 Руководство по конфигурации

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Сетевое оборудование 3Com 3CRWE725075. 3Com 3CRWE725075 10 страниц. Wds bridging and antenna installation
Также для 3Com 3CRWE725075: Руководство по конверсии (10 страниц)

Печатать страницу

WDS Bridging and Antenna Installation

3CRWE725075

3CRWE825075A

3CRWE875075A

3CRWE885075A

The 3Com Access Point 7250/8250/8750/8850 supports WDS Bridging, which provides a flexible way to

extend a wireless network. With WDS Bridging, you can increase your network to large, open locations

where pulling wire is cost-prohibitive, restricted, or physically impossible.

This guide explains how to configure a WDS link between two 3Com access points, and describes some

common installation scenarios for using WDS Bridging.

NOTE: For more information on the access points, including complete installation and

configuration instructions, see the Wireless LAN Access Points User Guide included on the

product CD in PDF format.

Understanding WDS Bridging Support

A Distribution System (DS) is a network (typically a wired network) that interconnects separate access

points into a single LAN. With WDS, the interconnection no longer needs to be physically wired.

WDS uses the wireless medium to interconnect separate access points, thereby eliminating the cost and

inconvenience that may hinder wire installations.

A WDS link can be used in a simple point-to-point link, a complex point-to-multipoint link, or a

multilayer topology.

Point-to-Point WDS Link

The following example shows a point-to-point WDS link configured between two access points.

Wireless Desktops

Configuration Guide

WDS Link

Wireless Desktops