Whirlpool WUR50X24EM Руководство по эксплуатации и уходу - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Холодильник Whirlpool WUR50X24EM. Whirlpool WUR50X24EM 32 страницы. Under counter refrigerator

Печатать страницу

4. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners, or cleaners containing

chlorine. These can scratch or damage materials. Dry

thoroughly with a soft cloth.

NOTE: To keep your stainless steel refrigerator looking like

new and to remove minor scuffs or marks, it is suggested that

you use the manufacturer's approved Stainless Steel Cleaner

and Polish. To order the cleaner, see "Accessories."

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces,

dispenser covers or door gaskets. If unintentional contact

does occur, clean plastic part with a sponge and mild

detergent in warm water. Dry thoroughly with a soft cloth.

5. Replace the removable parts.

6. Clean the condenser coils regularly. They are located behind

the base grille. Coils may need to be cleaned as often as

every other month. This may help save energy.

■

Remove the base grille. See "Base Grille."

■

Use a vacuum cleaner with an extended attachment to

clean the condenser coils when they are dusty or dirty.

■

Replace the base grille.

7. Plug in refrigerator or reconnect power.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to

replace the bulb with one of the same size, shape, and wattage.

To change the light bulb:

1. Unplug refrigerator or disconnect power.

2. Using a Phillips screwdriver, remove the screw located at the

back of the light shield. Pull the light shield back to remove

the tabs from the appliance. Remove the light shield.

A. Light shield

B. Tabs

C. Screw

3. Replace the bulb.

4. Reinstall the light shield by inserting the tabs. Align the holes

and insert the screw. Tighten the screw.

5. Plug in refrigerator or reconnect power.

Vacation and Moving Care

Vacations

If you choose to leave the refrigerator on while you're away, use

up any perishables and freeze other items.

8 8 8 8 8 8 8 8 8 8 8 8

If you choose to turn the refrigerator off before you leave, follow

these steps.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean the refrigerator. See "Cleaning."

4. Tape a rubber or wood block to the top of the door to prop

it open far enough for air to get in. This stops odor and mold

from building up.

Moving

When you are moving your refrigerator to a new home, follow

these steps to prepare it for the move.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape

them together so they don't shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the back

of the refrigerator.

When you get to your new home, put everything back and refer to

the "Installation Instructions" section for preparation instructions.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the

cost of an unnecessary service call.

Your refrigerator will not operate

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

■

Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■

Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit.

■

Is the Refrigerator Control turned to the OFF position?

See "Using the Control."

The motor seems to run too much

■

Is the temperature outside hotter than normal? Expect the

motor to run longer under warm conditions. At normal

outdoor temperatures, expect your motor to run about 40%

to 80% of the time. Under warmer conditions, expect it to run

even more of the time.

WARNING

Electrical Shock Hazard