Acom 3x2000A Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кабели и разъемы Acom 3x2000A. Acom 3x2000A 9 страниц. Hf power splitter/combiner for 3 amplifiers

Печатать страницу

4-2. The ACOM3x2000A Simplified Schematic Diagram

4-3. Troubleshooting

In a case of a problem, contact the service department of your dealer (see S.1-2).

5. SPECIFICATIONS

a) Frequency Coverage: 1.8-30 MHz continuous

Power Output: 5000W PEP or continuous carrier into a matched load (VSWR below 1.3:1). Reduce the output at

increased VSWR, linearly down to 2500W at VSWR up to 2:1.

c) Input and Output Impedances:

- nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;

- input circuit: broadband;

- input VSWR with 50 Ohm loads at the three splitter outputs: less than 1.3:1, 1.8-30MHz continuously (no tunings, no

switching);

maximum output mismatch: up to 2:1 at reduced output - see (b) above.

d) Primary Power: 100-240V via a 12V wallwart adapter (supplied).

e) Size & Weight (operating): W210mm x D325mm x H195mm, 6.4 kg.

f) Operating environments:

- temperature range: 0...+50 degs.Celsius;

- humidity: up to 95% @ +35 degs.Celsius.

6. STORAGE AND SHIPMENT

) Storage environments: the splitter / combiner can be kept packed in dry and ventilated unheated premises without

chemically active substances (acids, alkalis etc.) in the following climatic environment:

temperature range: -40 to +70 degs.Celsius;

humidity: up to 75% @ +35 degs.Celsius.

b) Shipping Size and Weight:

W390mm x D330mm x H350mm, 9.4 kg

c) Shipping environments: all types of transportation, including aircraft baggage section.

C A U T I O N