Whirlpool Cabrio W10151492B Руководство по эксплуатации и уходу - Страница 20
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Сушилка Whirlpool Cabrio W10151492B. Whirlpool Cabrio W10151492B 48 страниц. Fabric care system electric dryer
Печатать страницу
Modifiers
Automatic Cycle Modifiers
Use the Dryness Modifier to select dryness levels for the Auto Dry
Cycles. Press DRYNESS until the desired Dryness setting
illuminates.
The preset dryness setting is Normal when an Automatic Cycle is
selected. You can select a different dryness level, depending on
your load, by pressing Dryness and choosing More, Normal, Less,
or Damp. Selecting More, Normal, Less, or Damp automatically
adjusts the dryness level at which the dryer will shut off. Once a
dryness level is set, it cannot be changed without stopping the
cycle.
NOTE: Dryness Level selections cannot be used with the Timed
Cycles.
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the
Timed Cycles. Press TEMP until the desired temperature setting
illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
Air Only
Use the Air Only Modifier for items that require drying without
heat such as rubber, plastic, and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Only.
y T
p
e
f o
L
o
a
d
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
R
u
b
b
r e
b -
a
c
k
e
d
u r
g
s
Olefin, polypropylene, sheer nylon
*Reset cycle to complete drying, if needed.
When using Air Only
Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Only is not available with Automatic Cycles.
20
You can customize your cycles by selecting options.
Drum Light
On some models, select Drum Light to turn on the light inside the
dryer drum. During a cycle, if Drum Light is selected, the drum
light turns on and will remain on until DRUM LIGHT is pressed
again, the door is opened and closed, or the door is left open for
5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed, or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
WRINKLE SHIELD™ Setting
The WRINKLE SHIELD™ setting helps keep wrinkles from
forming when you cannot unload the dryer promptly at the end
of a cycle. During this option, the dryer stops tumbling and then
tumbles again for a brief period.
Press the WRINKLE SHIELD™ setting to get up to
120 minutes of heat-free, periodic tumbling at the end
of a cycle.
Stop the WRINKLE SHIELD™ setting at any time by pressing
WRINKLE SHIELD™ setting or opening the dryer door.
For the Perm Press/Casual Cycle, the WRINKLE SHIELD™
setting is preset to ON. The other Automatic Cycles will retain
the WRINKLE SHIELD™ setting. For example, if you select
the WRINKLE SHIELD™ setting in the Normal cycle, the
WRINKLE SHIELD™ setting will be on the next time you
select the Normal cycle.
NOTE: If you do not select the WRINKLE SHIELD™ setting, the
dryer stops after cool down.
i T
m
* e
(Minutes)
Damp Dry Signal
20 - 30
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
20 - 30
lightweight items in a mixed load to avoid overdrying or remove
4
0
-
5
0
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in a
10 - 20
mixed load. When the signal goes off, open the door to stop the
dryer, rearrange the load inside the dryer, close the door and
restart the dryer to finish the drying cycle. Rearranging the load
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Automatic
Cycles.