Whirlpool CGM2793BQ Руководство по установке - Страница 21
Просмотреть онлайн или скачать pdf Руководство по установке для Сушилка Whirlpool CGM2793BQ. Whirlpool CGM2793BQ 48 страниц. Commercial dryer gas or electric
Также для Whirlpool CGM2793BQ: Руководство по установке (48 страниц)
Печатать страницу
ELECTRIC DRYER ELECTRICAL
CONNECTIONS
(FOR
U.S.A.
ONLY)
Connecting
4-Wire
Connection:
Direct Wire
Connecting Neutral Ground and Neutral Wires (cont.)
2. Connect neutral ground wire (B) and place hooked end (hook
facing right) of neutral wire (white or center wire) (D) of direct
wire cable under center terminal block screw (A). Squeeze
hooked ends together and tighten screw.
H
Connecting
Remaining
Wires
4. Connect remaining wires under outer terminal block screws
(F). Squeeze hooked ends together and tighten screws.
Connecting
Direct Wire Ground
3. Connect ground wire (green or bare wire) (E) of direct wire
cable under green external ground conductor screw (C).
Tighten screw.
Connecting
3=Wire Connection:
Direct Wire
Use where local codes permit connecting
cabinet-ground
conductor
to neutral wire.
Direct wire cable must have 5 ft. (1.52 m) of extra length so
dryer can be moved if needed.
Strip 31A" (89 mm) of outer covering from end of cable. Strip
insulation back 1" (25 mm). If using 3-wire cable with ground
wire, cut bare wire even with outer covering. Shape ends of
wires into a hook shape.
Connecting
Neutral Wire
1. Loosen or remove center terminal block screw (A).
H
2. Place hooked end of neutral wire (white or center wire) (D)
of direct wire cable under center terminal block screw (A),
hook facing right. Squeeze hooked end together and tighten
screw.
3. Connect remaining wires under outer terminal block screws
(F). Squeeze hooked ends together and tighten screws.
Finally, reinstall terminal block to dryer rear panel. Secure
cover with hold-down screw.
21