Fireplace World Miami Curve Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Крытый камин Fireplace World Miami Curve. Fireplace World Miami Curve 4 страницы. 42 inch wall mount electric fireplace

Печатать страницу

Warning: Installing this product below 300mm will cause

overheating issues.

The suite is designed as a wall mounted suite; it is not suitable

to be installed at floor level.

Installation:

This model is provided with a wall mounting bracket along

with x5 screws and wall plugs.

PLEASE NOTE: The screws and plugs provided are only

suitable for a solid wall fixing.

If the installation is onto a hollow/stud wall, we recommend

that heavy duty wall anchors or equivalent are used.

To install the product:

1. Measure 700mm from the floor level up the wall, Mark this

measurement with a pencil.

2. Place the bottom edge of the wall bracket on the 700mm

mark, level using a spirit level and mark and drill the x5 fixing

holes.

3. Using the correct wall fixings screw and fix the wall bracket

in place.

4. Locate the x3 slots in the rear of the product, carefully align

these slots with the prongs on the wall bracket, lift and slot the

product into place.

5. Locate the power cable socket on the bottom right hand

side, underneath the hearth on the fire, and plug the power

lead in.

6.The product is now ready to use.

OPERATION

Once the electric heater has been properly installed and

connected to a ground electrical outlet, it is ready to operate.

Note: Ensure the circuit breakers for the power supply are

turned on.

OPERATION WITH THE CONTROL PANEL

The appliance is operated manually using the rocker switch

to the right of the heater outlet.

O/I:

Press this switch for main power function. Press again

will stop the main power function.

The heater is preset to start with flame effect.

O/ :

For low heat function - Press this switch while the O/I

switch is in the ON position. The heater will provide low

heat level. Press once again to stop the low heat level

function.

O/ :

For high heat function - Press this switch while the O/I

switch and the O/- switch are in the ON position. The

heater will provide high heat level. Press once again to

stop the high heat level function.

Press this switch for ambient side lighting function.

Press once again to stop the ambient side lighting

function.

Note: When the O/I switch is turned off, all other functions

will stop even though the switches may be in the ON position.

MAINTENANCE

WARNING: DISCONNECT POWER AND UNPLUG THE

POWER CORD BEFORE ATTEMPTING ANY MAINTENANCE

OR CLEANING TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR PERSONAL INJURY.

To avoid buring of the skin, please turn off the heater and

cool down it for at least 10 minutes before maintenance.

CLEANING

To clean unit, first turn off the controls on the unit and unplug

the unit from power source.

To clean glass, remove dust with clean dry cloth or to remove

finger prints and other marks clean glass with clean damp

cloth. Do not use abrasive cleaners or spray liquids on the

glass surface.

Metal and metal painted parts should be cleaned with a damp

cloth. Do not use abrasive cleaners or spray liquids on these

surfaces.

STORAGE

When the heater is not in use, the heater should be stored in

a dry location, away from possible damage. The power cord

should be stored properly to avoid contact with hot or sharp

objects.

REPLACEMENT PARTS

ITEM

Mounting kit

PART #

RO2716-48#1

QTY