Whirlpool WHDSCX80112 Справочное руководство - Страница 2

Просмотреть онлайн или скачать pdf Справочное руководство для Сушилка Whirlpool WHDSCX80112. Whirlpool WHDSCX80112 8 страниц.

Печатать страницу

FIRST TIME USE

BEFORE USING THE DRYER

CHECK DRAIN HOSE AND WATER TANK

Make sure that the drain hose on the back of the dryer is fixed

correctly, either to the dryer's water tank (see picture), or to your

domestic sewage system (see Installation guide).

DAILY USE

WARNING

LOAD LAUNDRY

Prepare your laundry according to the recommendations in

section HINTS AND TIPS.

Make sure that pockets are empty, fasteners closed and

ribbons tied together.

Open the door and load the laundry. Observe the

maximum load sizes given in the PROGRAMME CHART.

CLOSE DOOR

Make sure that no laundry gets stuck between door glass

and door filter.

Close the door so that you can hear it click shut.

SWITCH ON DRYER

Press the On/Off button « until the programme button lights

up. An animation occurs, and there is a sound. Afterwards

the dryer is ready to be operated.

Also make sure that the water tank is correctly inserted.

See Use and Care Guide for more details on functions /

see last page for information on how to obtain the Use and Care Guide

Make sure that no lighters

or matches remain in the

laundry.

Make sure that the laundry

is not soaked with

flammable liquids.

SET THE DESIRED PROGRAMME

GUIDED MODE – the button light will guide you through

setting your programme in the following order: selection of

programme / drying time (ONLY if Drying time or Airing

programme is selected) / dryness level (only if selectable /

adjustable) / options. As soon as you confirm a selection by

pressing the knob, the button light will jump to the next

step.

Select programme:

Make sure that the Programme button « lights up.

Turn the knob to select the desired programme.

The indicator next to the selected programme lights up.

Confirm the desired programme by pressing the knob.

Find more information regarding programmes in the

PROGRAMME CHART.

Select Drying time, if needed

Only if you have selected programme Drying time or Airing «,

you can set the desired drying time from a minimum of 10

minutes to maximum 180 minutes (three hours).

Make sure that the Drying time button lights up.